Re: Suspect Bad PS Apple AcBel API 1PC36
Purple it is....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Suspect Bad PS Apple AcBel API 1PC36
[B]CORRECTION:[/B] C7 Capacitor noted on the above MAP.jpg shows incorrect info. [U]Should[/U] [U]read[/U] : [B]C7 - 220 uF /35V[/B]
Re: Suspect Bad PS Apple AcBel API 1PC36
[B]CORRECTION:[/B] C7 Capacitor noted on the above MAP.jpg shows incorrect info. [U]Should[/U] [U]read[/U] : [B]C7 - 220 uF /35V[/B]
Re: Suspect Bad PS Apple AcBel API 1PC36
[B]CORRECTION:[/B] C7 Capacitor noted on the above MAP.jpg shows incorrect info. [U]Should[/U] [U]read[/U] : [B]C7 - 220 uF /35V[/B]
Re: Suspect
Leave a comment:
-
Re: Suspect Bad PS Apple AcBel API 1PC36
Finally, the correct thread... Thanks again Toasty! Much higher resolution file is available if you'd like. Just email me. I'll most likely be in touch again, once I crack open a Samsung PSU for clarifications on a similar line-art project. Cheers!...
Leave a comment:
-
Re: Power Mac G4 MDD "Mirror-Door" won't power up
Thanks luvtrumpsh8, buz, & [U]most[/U] [U]definitely[/U]…[B]Toasty[/B]!
Six months later, I'm back here (like a bad penny perhaps). Both my MDDs are still running strong, but realizing the near-absolutely inevitable… I've begun work on a failed AcBel 360W PS.
The “other” lengthy thread here, begining with a post from buz (April 2011), concernning his failed AcBel has proven absolutely invaluable in this, my initial attempt at this PSU resurrection. (Glad indeed that I drew an AcBel...
Leave a comment:
-
Re: Power Mac G4 MDD "Mirror-Door" won't power up
Ahh, so there are newer posts in this matter instead of only the one ending in 2010. So, here's a double post (as I haven't read through this particular thread yet). But, I shall now read after posting this...
AND NOW… 7 years after the last post on this thread, I’m on here asking if there’s anything new in this process (as in: a *simple* PSU “remove old and replace with new” replacement for these old PSU’s), or am I destined to begin the recapping and test procedures noted...
Leave a comment:
-
Re: PowerMac Dual 1Ghz Mirror Drive Pop&Burn Power Supply
AND NOW… 7 years after the last post on this thread, I'm on here asking if there's anything new in this process (as in: a *simple* PSU “remove old and replace with new” replacement for these old PSU's), or am I destined to begin the recapping and test procedures noted herein? I've two of these (still), working G4 MDD's that now… just after turning 14 years old, might indeed be waay past due for some “brain salad power-supply surgery”. Like to see ‘em both go another 14 years.
*as if “simple”...
Leave a comment:
-
Re: New Members - please post your introductions here
First post. It's late and I'll certainly be back later today when I'm awake. Just researching/beginning the project of PSU repair on Apple G4 MDD. I've a basic knowledge of the process and have a few flat panel TV power supply repairs under my belt. Hopefully, the MDD PSU project will be as successful. Hello y'all.
Leave a comment:
No activity results to display
Show More
Leave a comment: