Re: Socket 775 pin repair
nice idea...
jtctolits
Member
Last Activity: 05-29-2018, 11:41 PM
Joined: 07-29-2010
Location:
-
Re: emaxx emx-amd880g-fxn bios needed
Brod, paki tingan dito
Brod, kindly look here
[url]http://******************75[/url]Re: emaxx emx-amd880g-fxn bios neede...******75[/url]Leave a comment:
-
Re: Asus M2N68 & M2N68 PLUS
nvidia.....againLeave a comment:
-
Re: MCP73-T-M bad caps
replace the cap.
since you have an invidia chipset mobo, as a preventive measure out a small fan on the chipset heatsink.Leave a comment:
-
Re: ECS GeForce6100PM reboot issues
nvidia chipset failure?Leave a comment:
-
Re: Favorite recapping methods
melt and push method, then needle method to place the new capsLeave a comment:
-
Re: MSI K8N Neo (Socket 754) boot problem
i noticed that when i plug the CPU fan to the northbridge fan (3 pin) connector, it will not spin, thus, there is no power coming out of the northbridge fan pin (3 pin). It might be the north bridge has screwed.Leave a comment:
-
Re: MSI K8N Neo (Socket 754) boot problem
@ kc8adu
i do not have a post card. i tried putting a PCI video card (S3 Trio) but to no avail
here are the hardware;
- MSI K8N Neo
- Athlon 2800
- Kingston 512 mb DDR1
- ATI Radeon 9250 AGP
- Hec Raptor 500wattsLeave a comment:
-
MSI K8N Neo (Socket 754) boot problem
This motherboard together with Athlon 2800 were given to me. The problem of this mobo;
- when i power on the AVR, without out pushing the power button of the cpu, it will power on immediately(cpu fan spinning) for 3 seconds. then power off.
- then i push the power botton (after the cpu fan stops spinning), it will power on but; no display, no beep. The cpu fan just keep on spnning without booting.
Troubleshooting done:
- clear CMOS;
- change CMOS battery;
- reset memory;
- reset processor;
- change power supply;... -
Re: New Members - please post your introductions here
hi, Im a new member here, i already browsing this very informative site, before i was not yet a memberLeave a comment:
No activity results to display
Leave a comment: