empm_mx
Member
Last Activity: 10-07-2024, 05:21 PM
Joined: 05-14-2017
Location: CDMX
-
thanks for taking your time, but it is still asking for password.... -
I managed to get it read after scrapping the center and pressing with the hot iron set at 300°[B]C[/B] while reading (otherwise it gave me reading errors), flashed another chip and the laptop is back alive but has password, I tried using the method for the Surface 3 (with the excel decryptor), tried with the amidecrypt (didn´t find the AMITSEDecrypt folder) , tried the XOR method for Panasonic, but I couln´t unlock it, can someone help me pls?I managed to get it read after scrapping the center and pressing with the hot iron set at 300°[B]C[/B] while reading (otherwise it gave me reading errors),...Leave a comment:
-
no I don´t have another programmer right now, but I´ve found a different motherboard with the same SPI chip, it was read with no errors.Leave a comment:
-
I did disabled auto-verification, read it two times with two different options: GD25LQ64C_1.8V and GD25LQ64C_1.8V(8K BIT OTP) it´s still corrupted, I didn´t tried before but I soldered it back to the motherboard, laptop turn on but it has no image, I assume the chip is dead.
I can´t upload bin files, but the file in hex editor looks like the image, that´s why the zip is so small...Leave a comment:
-
Sorry, somehow I mixed the SPI chip model, it is actually 25LB64CVIG which is 1.8V, RT809F doesn´t have that model but has GD25LQ64C_1.8V...Leave a comment:
-
LANIX NEURON FLEX 12C4-C20 BIOS REQUEST
I need the bios for this Lanix, bios setup had password, I desoldered the SPI chip (25LQ64CVIS) it read once (I used RT809F) but the backup saved was corrupt, I tried to read it again but it fail, I suppose the chip is dead, I´ve been searching over internet but couldn´t find a matching bios for this laptop model or motherboard.
MODEL: LANIX NEURON FLEX 12C4-C20
MOTHERBOARD: In-SG133H_VF1
SN: 2882301749
SPECS: Intel Celeron J4115, 4GB RAM, 64GB EMMC
Thanks in advance.... -
I have this one laptop that didn´t show any image on screen, after flashing both 8MB and 16MB SPI´s ic now it works fine but doesn´t boot windows, it keep asking me for a bitlocker recovery key, client says he doesn´t know it, what should I replace from the backup to get it boot like before?Leave a comment:
-
Re: Microsoft Surface Pro 3 UEFI password
Thank you so much @AAAC it worked perfectlyLeave a comment:
-
Re: Microsoft Surface Pro 3 UEFI password
Can someone pls help me. This is a Surface Pro 3 bios locked
Thanks in advance
Last edited by SMDFlea; 03-25-2023, 06:14 AM.Leave a comment:
No activity results to display
Leave a comment: