Re: 60pv250-ub

Ok update well kinda

after checking the 2 of the 8pin ic i replaced on the back, one of them had not bonded in correctly i soldered that back down as well as went and tested the 4633 chips and didnt find any blown from center to left pin got like 3-500 from center pin to right pin i get ol also i get 40v on the vzb spot on the board when i hit the power button but then it starts to fade down to 0. im not sure where to get the voltages that may help in my repair any advise is helpful

Re: 60pv250-ub

Thank you good sir i will do that by chance do you have a picture i could see the correct orientation of the ic plz i cant seem to find a decent image i can zoom in on to see

Hey all,

first off i have looked threw quite abit of this fourum during my trouble shooting of this tv here where im at

My voltages from vzb vstp vatp go up but then peter to 0 on my volt meter (tho i think my volt meter is needing to be destroyed) as well as the one on the y sus

i was getting a green blinky light on the mainboard and a red light on the front that would come on then when i hit the power button and go right out when i hit the input button and the hear the relay click a few times and then have to turn it back on

Then...

Re: New Members - please post your introductions here

hey badcaps im josh im from oregon and i have a need to use your site to try and fix my 60pv250ub