Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

It seems my enjoyment was short lived. I now have sound, but no picture. I suspect a faulty Y-Sus board. Going to see if I can have it repaired or opt for a new set.

Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

Turns out that the Mainboard was bad. I was able to get another in the set it fired right back on. Hopefully this set will last me a bit longer before moving on to OLED as prices continue to fall.

Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

Does anyone know how to remove the Z-Sus board from these connectors. I just can't figure it out?...

Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

I managed to get some pics of the back of the Z-Board. The three coils are what this is. Looks like some cracks in the solder. The one thing that I can't figure out is how remove the board itself from the three connector clips. I can't seem to disconnect it from the thin board so I tried removing that one as well but I can't figure out how to remove the ribbon cables. I release the latch and they are loose, but they wont slide out. If anyone knows how to do it please advise....

Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

Forgot the new board pic....

Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

Here are the pics...

Re: Please Help! LG 60PZ950 plasma doesn't have any picture nor sound when turn on.

I'm having the same issue with no pic or sound. TV powers on with the blue light on front, blinks when pressing remote so it's getting a signal. I disconnected first the Y-Sus board. No sound or pic. Then the Z-sus, same result. I tried the 2 buffer boards, first the upper. Half of horizontal screen was light gray color. Same thing happened with the lower disconnected. The one thing I found out of place but not sure about is on the upper right corner of the Main Board looks like soldering flux or...