Drassh
Member
Last Activity: 03-15-2024, 10:59 AM
Joined: 04-10-2017
Location: Baja California
-
Thanks for sharing.... -
Thanks, Got a Curios issue with Mine where it would randamly freeze while in use without any errors. Looking to see if it is a mosfet in cpu vcore.Leave a comment:
-
Thanks for the share.Leave a comment:
-
Re: bios for all dell 5559 and guide fix severtag
Thanks Vhn1998 for this.Leave a comment:
-
Re: Dell 15-AAL15 LA-D071P
Thanks for heñping in findind the schem and sharing it here. Very much appreciatedLeave a comment:
-
Re: inspiron 14 5000 series NEED Schematic
Thanks for the help in getting the schem. Seems this laptop is troublesome to repair without one.Leave a comment:
-
Re: Hp Omni 200-5340LA with weird symptom (possible cap)
ok thanks.
I went out to look for a replacement cap and i was given these (Picture included). Now the computer briefly turns the led on and then turns off. I'm thinking the cap is not the right one or there's a short somewhere. Also, added electrical tap to prevent the metal casing from making contact with the caps....Leave a comment:
-
Re: aspire E1-750p
Not to bump this unnecessarily but yup, did just as @diif said and the files are from a site I use for this kind of stuff. My suggestion would be to follow the power flow or block. Also, if you need help in Spanish, I'd be more than happy to help.Leave a comment:
-
Re: Replacing a 200V 1200uF Cap in a SMPS
Hello, someone correct me if i'm wrong but I have learned, that when replacing a cap, the voltage can be higher than the original but not lower. In the uF area it would have to be the same. So my guess would be to wait for the right one. ^.^
-DrasshLeave a comment:
-
Re: Hp Omni 200-5340LA with weird symptom (possible cap)
@diff Thank you very much for the Info! With this info it will make it easier on getting the voltage. By any chance do you know what the L60 part might mean?Leave a comment:
-
Hp Omni 200-5340LA with weird symptom (possible cap)
Hello and good morning from my end. To keep this nice and short, there are 2 capacitors in the power area of the CPU that show damage that i'm having trouble identifying with markings
330
EFK
L60
More or less is that is anywhere from 220uf and up to but not 470uf with a no idea in voltage, give or take 20v, 25v, or 30v as the max power is 19v at 7.89A.
What the computer does is, the LEDs blink rapidly until it is unplugged from the power supply. If the CPU is removed from the socket then reinserted, it turns on as if nothing happen. After a restart... -
Re: Assistance needed with xbox one controller
Another thing that can help to find any form of a schematic is by looking up controller mods.
These are from the first model controls and use them as a comparasen....Leave a comment:
-
Re: IMac mid 2011 model with possible damaged PSU
here are a bit more pictures. the big capacitor under the vents is hard to read the markings and another is a square ceramic....Leave a comment:
-
Re: Help with identification of sot-23-3
what device is this? and if possible. get the entire motherboard picture. one for the top and another for the bottom.Leave a comment:
-
IMac mid 2011 model with possible damaged PSU
I have this IMac as a personal collection and started to notice that it was making a noice during daily use. So I decided to give its first ever maintenance.
Once everything is clean and reassembled, I power it on but there's no reaction. After a bit of teardowns and reassemblies I give up to Google the issue. From there I learned that there are 4 diagnostic LEDs marked LED501-504. With the screen disconnected, I get the first led with a solid on, Led 502 turns on, blinks a few times then turns off. This repeats until I pull the power cord. Now to make sure the machine is receiving the... -
Re: Someone have schematic to Apple iMac 21.5" 820-3126-A ?
Thanks, was looking for this due to an issue after only giving the machine a cleaning...Leave a comment:
-
Re: Useful Schematic component Code for Laptop
neat, thanks. now i don't have to guess that they mean. ^.^Leave a comment:
-
Re: Xbox one controler does not turn on.
Got it, and the controller is working now. ^.^ ThanksLeave a comment:
-
Re: PS3 fat 2nd gen BlueRay / DVD drive problem CECHK01
That's strange, I get the symptoms the other way around with issues using bluray. One strange way to fix the issue is to test using a fresh OS install on another hard drive.Leave a comment:
-
Re: Xbox one controler does not turn on.
It is located on the power supply rail, bottomside of the board. Use the 3rd picture that was uploaded above as reference if you don't have a controller on hand. And thanks sam_sam_sam for bearing with me.Leave a comment:
No activity results to display
Leave a comment: