Re: newbie needs help

i do believe that it worked

i will know if or when the puter freezes up that is what happened last time the puter keep freezing up and after an extensive search i found the cap on the vid card popped but now it is back in and working
way kool!!!!!

Re: newbie needs help

i tried to use an ohm meter to see where i would get the reading
i grounded one wire and touched the holes and got a reading on both witch im thinking that the pos. side would not give me a reading

Re: newbie needs help



so i am right then ??? the bottom is the neg....

Re: newbie needs help


nah its a cheapie mx 400 gforce 2 agp the only other cap going the same way is the one on top this is why i think the neg. is on the bottom...

Re: newbie needs help

fixed the img code.

i recently blew out a cap on my vid card and i found the same exact one on an old mother board my problem is that i took a pic to make sure of the pos. and neg. sides now the side i thought for sure was the neg. has what looks like a pos. sign next to it i just want to make sure that it is the neg. side before i do more dammage or any damage to the motherboard

here is a pic of the card
[url]http://img243.*************/img243/3228/dscn1369pk8.jpg[/url]

in the white area it looks like it has the pos.sign but if you look at the cap on top it is sitting the...