Hi,

I just thought I would post info on some Antec SP-350 ATX PSU that are installed in 3 computers at work. Purchased the computers on the 14/06/2007 after about 14 months some of the computers would fail to power up from standby or boot correctly. Replacing 2 caps fixed the problem have been running for 6 months or so fine.

Caps replaced were:

EC10: 10V 2200uf (koshin) which was vented on 2 of the computers.

EC11: 10V 1000uf (Teapo) vented on 1 computer with different Main board.

Can't remember now but I think EC10 was...

Re: Can someone identify this brand of Cap?

Thanks for the info everyone. The reason I know the caps are failing is due to them venting. All the caps on the outputs have vented except for -12v which would hardy be used. I understand that if they are failing they must be bad caps but even good caps would have to fail at some stage. In this cast though I would say that "Saturn caps" can be added to the list if they are not already.

Ryan

Re: Can someone identify this brand of Cap?

Those brand of caps are on the secondary output of a L&C PSU and they are failing. I wanted to know the name of the company that makes the cap, so I could look up on the web (and here) to see if they are a "bad cap".

Ryan

Hello,

I have just found this web site and forum. I have attached a photo, it's not the best (flash reflection on cap) but could someone help me identify the brand of Cap in the photo. It is the black one in the middle of the photo which has the logo that looks like a big C with Y inside the C and a ring around it. I have searched on the web but no luck so far. The photo is taken from a L&C ATX PSU.

Ryan...