Will double check it on tuesday or wednesday.
I updated already to msi site bios but thats where it said that buffer size not equal to ic
only thing i need to check in boardview is that bios chip is winbond not mxic
Normunds
Member
Last Activity: Today, 04:54 PM
Joined: 02-10-2017
Location: Bilston
-
Original bios downloaded from msi site seems to be too large for chipLeave a comment:
-
Gs66 10sfs bios issue
I tried to update bios with ch341 and normally all is good.
now it says that buffer size is not equal to ic size.
I downloaded bios and ec from msi website.
Laptop model - GS66-10sfs
mobo model - MS-16V11 ver 1.0
Programmer used: ch341
ec chip - Mxic mx 25l12872f
bios chip - winbond 25q16jvnic
Tried ch341 programmer software and other softwares. I can read and write but buffer size is not the same as chip. Looms lije file is larger than chip can handle. Maybe need to trim file... -
Hi!
I am working on laptop mainboards from time to time. Would like to discuss some bios issuesLeave a comment:
-
hp 450 g4 motherboard problem
19 volts on fet drain, but nothing on source or gate, no shorts to ground on any coils, looked at power management chip and not getting 25v on acdrv. at power connector i am using labaratory power supply 19v and resistor of 100 ohm to 6th leg for ad_id signal. pwm chip: vcc- 18,82v ac det- 2,59v regn- 5.99
link to boardwiew schematics etc [url]https://failiem.lv/u/n9ah9h829[/url]https://19 volts on fet drain, but n...supply 19v and -
Re: New Members - please post your introductions here
Hello guys. I am repairing gaming consoles tv's and some more electronics. Would like to learn even more from this nice websiteLeave a comment:
No activity results to display
Leave a comment: