Re: Toshiba satelite c650 not working
There is definitely low voltages in places to what there should be with highest only of 18v. I need to find out why I am not getting the 20+ volts especially at PDSL which is showing 0v. Also Acok is 5.29v and should be 0v
FastEddy
New Member
Last Activity: 08-31-2021, 12:49 PM
Joined: 01-26-2017
Location: BANGOR
-
Re: Toshiba satelite c650 not working
Hi all,
Spent the day getting more voltage measurements and putting them onto the schematic.
This might give you more insight into the problem.
It is only the first 4 pages of schematic but more to follow later.
Hope you can see the problem
thanks
FastEddy...Leave a comment:
-
Re: Toshiba satelite c650 not working
Tried the 30 sec PW button no changeLeave a comment:
-
Re: Toshiba satelite c650 not working
Thanks for reply, the Voltage at +VBat = 3.51vLeave a comment:
-
Re: Toshiba satelite c650 not working
Hi,
Does anybody have any ideas for this problem?Leave a comment:
-
Re: Multisim
I find it okay but difficult if the part you want to place is not in the masterdatabseLeave a comment:
-
Toshiba satelite c650 not working
Hi guys and dolls,
For a friend I am trying to find the fault on C650, 6050A2355301-MB-A03, MAS10M.
I am using the schematic attached.
Measurements as follows,
Adaptor only no Battery on
NOTHING WORKING NO LIGHTS NO FAN COMPLETELY DEAD.
Battery pins =
1=0v
2=0v
3=0v
4=0v
5=1.02v
6=0v
7=0.01v
8=3.53v
9=3.53v
CN6000 = 19v
R6036 = 0v~0.02v
R6013 = 1.66v ~ 0v
R6016 = 18.8v ~ 0.00v
R6000 = 8.53v ~ 8.53v
L6000 = 3.52v...Last edited by FastEddy; 01-29-2017, 06:34 AM. -
Re: New Members - please post your introductions here
Hello to all "Badcaps" members.
Just a quick message to introduce myself.
Eddy, from Bangor, Northern Ireland.
A beginner in electronics, learning new stuff every day.
This site is the best I have seen and I am thrilled to be a part of the community here.Leave a comment:
No activity results to display
Leave a comment: