Re: Replaced NEC/Tokin capacitors now screen blank help please
FIXED - I just want to say a big Thank you for all the assistance - I also contacted the person wrote original YouTube video and he suggested maybe a tiny bit of solder was touching a close by component - I gently scraped with small flat screwdriver the solder back and worked straight away .
Smali - also suggested clean area around which I did so thanks for that also .
But thanks for all for suggestions hopefully this thread will also help someone else if run into same problem .
Thanks all owe you...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
Hi Jiroy
Don't have external monitor - have LCD TVs , so tried s-video out of laptop (but think need do some settings in system to make work don't I ?) also tried the HDMI out to TV but nothing there ,
TV does have a PC in VGA socket but I don't have a cable - is it worth buying a cheap cable to try it ? VGA to VGA laptop to TV would this show as external monitor ? .?
Do I not have to change settings in operating system to make external display work ? Which cannot do when cannot see...Last edited by globalmark; 01-21-2017, 09:23 PM.
Leave a comment:
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
Ok tried to restart without battery
Also resolder back in after couple mins and no change .
Thanks for suggestions ?
Can the replacement capacitors cause this ?
Am I lightly to have left something disconnected ?
Looks like nothing happening with monitor at all ?
Leave a comment:
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
Hi all
Ok just taken apart again - reseated everything making sure clean removed and replaced CPU no pins bent .. No change
Lefos - battery removed is 3.19v out of computer -
Do you mean try to start laptop without RTC battery or just leave out one minute , solder back the battery and retry ?
Thanks Mark
Leave a comment:
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
Hi guys
Capacitors are brand new came in sealed plastic - from eBay from Portugal reputable seller . For that correct purpose so as far as I know correct size.
I have remover CPU (if that's square thing many pins on it) twice now but will try again , has no bent pins but very loose fit , when took out was very easy and to replace basically dropped in then twisted plastic screw half turn to lock in.
just cleaned area - where is PCB line to check ? - I removed old capacitor...
Leave a comment:
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
Hi guys
Thanks for help so far - how and where exactly do I check other voltage on PL coils (what is PL coil and where is it and how to check ) and ram (have removed and replaced several times in different slot) but only have one ram chip ..
What and how to check RTC battery ?
How to flash bios when cannot see screen - no external monitor (only computer in house)
Laptop was working before changed capacitors just restarting itself if plugged into mains power on battery...Last edited by globalmark; 01-21-2017, 01:48 AM.
Leave a comment:
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
I used this video to remove and replace
[url]https://m.youtube.com/watch?v=4W2AljjOUYQ[/url]
And removed all chips/ things he suggested on video to stop damage to them the replaced - think main processor and graphics chip etc (not 100%) sure what they were but removed and replaced ok .
I also replaced with all new heat sink compound - removed old with alcohol cleaned and dried then some new if that makes a difference .
Could I have damaged graphics card (I was really gentle and...
Leave a comment:
-
Re: Replaced NEC/Tokin capacitors now screen blank help please
Hi
Thanks for reply
Photo taken of new capacitors . Have attached image .hopefully shows up .
How would I test that voltage , I have a basic multimeter but where and how should I test ?
As mentioned Laptop seems to power on ok just blank screen ? Would that be the capacitors or something else ?
Thanks Mark...
Leave a comment:
-
Replaced NEC/Tokin capacitors now screen blank help please
Hi
I have just replaced the NEC/Tokin capacitor in a Toshiba A300 as per instructions on this site and Internet and YouTube etc with the 4 replacement 330's (or whichever was correct)
I am a beginner when comes to laptop repair done light stuff before and I am ok at soldering .
All seems to have gone well no problems removed easily and soldered replacements on fine .no problems that I can think of .
I just put the laptop back together and turned it on. The fan spins and sounds like turned on lights all on etc however now the screen is completely black (blank)...
No activity results to display
Show More
Leave a comment: