Re: Pioneer PDP-507XD 7 Blue Blink Help ?
Thank you Roger....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Pioneer PDP-507XD 7 Blue Blink Help ?
I have received the Y-SUS board for PIONEER PDP 436 PG and installed it. The observation are as follows:
a) In the display unit - The blue LED stays lit for a few second and starts flashing at an interval of 3 blinks, pause and then starts continuing 3 blinks
b) In the media receiver, initially it is on standby, when the power thru remote is switched on, the Blue LED is lit fora few seconds and goes to a standby mode.
I will appreciate for your help in this regard.
Does the media receiver...
Leave a comment:
-
Re: Pioneer PDP-507XD 7 Blue Blink Help ?
Can anyone suggest me how to reset my Pioneer Media receiver PDP-R06G...
Leave a comment:
-
Re: Pioneer PDP-507XD 7 Blue Blink Help ?
Can I test the Y-SUS board disconnecting two ribbon type connector which are going to the buffer board...
Leave a comment:
-
Re: Pioneer PDP-507XD 7 Blue Blink Help ?
Hi, I have Pioneer PDP-436PG pioneer TV. It has a symptom of 7 times blinking LED after the power shuts down showing orange in the media receiver. I had given the TV to the local pioneer Srvs center and they said that it is the problem with the Y-SUS board. Since they do not have them in stock, I took the TV back. Now when I turned on, the symptom is after a few seconds the TV shuts down with 3 blinking Blue LED. When I asked the Srvs center they said, since the the buffer boards have been disconnected , it needs to be reprogrammed....
Leave a comment:
No activity results to display
Show More
Leave a comment: