Re: Vizio E601i-A3 - No Power Issue
12V AU and 12V T-CON disconnected
[url]https://www.youtube.com/watch?v=XUg1piXQLyM[/url]
Also with the bulb attached
[url]https://www.youtube.com/watch?v=GEuENRDiObI[/url]Re: Vizio E601i-A3 - No Power Issue<...ENRDiObI[/url]Re: Vizio E601i-A3 - No Power Issue
...
Element18592
Member
Last Activity: 06-11-2023, 12:15 PM
Joined: 01-11-2017
Location: Gulfport
-
Re: Vizio E601i-A3 - No Power Issue
My mistake, I thought you were wanting to check the resistance under load.
[url]https://www.youtube.com/watch?v=VwjHBSJZP5s[/url]Re: Vizio E601i-A3 - No Power Issue<...HBSJZP5s[/url]...Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
Using a smaller car 12v head lamp bulb but the cold resistance is 3.3 ohms.
[url]https://www.youtube.com/watch?v=ReOOeZK_wUs[/url]Re: Vizio E601i-A3 - No Power Issue<...OeZK_wUs[/url]...Last edited by Element18592; 09-26-2018, 11:22 AM.Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
Yes....Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
Looks like I don't have any 1/2 watts on hand either. I'll put in an order for some 3w resistors....Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
I don't. I might have some 1/2 watt 4.7 ohm resistors and some smd 4.7 ohms but not 3w....Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
Hope you're okay with the constant videos. I figure it's probably preferred to see the same outcome I see vs me explaining it to you.
[url]https://www.youtube.com/watch?v=FsAvqbbsnnc[/url]Re: Vizio E601i-A3 - No Power Issue<...vqbbsnnc[/url]...Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
Same as before, constant 12.3 with the main board disconnected....Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
With the main board connected
[url]https://www.youtube.com/watch?v=P4Nwah1XR6Y[/url]Re: Vizio E601i-A3 - No Power Issue<...wah1XR6Y[/url]...Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
I was always under the impression that OL on Fluke meters meant open loop or open circuit. Its set to auto range by default so it shouldn't have any problem reading a voltage over 20....Leave a comment:
-
Re: Vizio E601i-A3 - No Power Issue
Yes same board. The voltage with the main board connected is intermittently showing 12v. When the main board is disconnected I get a constant 12v.
Video:
[url]https://www.youtube.com/watch?v=tG-ZavtkLJ4[/url]Re: Vizio E601i-A3 - No Power Issue<...ZavtkLJ4[/url]...Leave a comment:
-
Vizio E601i-A3 - No Power Issue
So I was hoping somebody here would be able to offer me some advice on the matter. I explain more in the video below what I've done so far. Now this isn't shown in the video but I've also tested with everything removed from the main board with the exception of the power supply cable and I'm still getting nothing on 3v3 standby but the result is the same, once I disconnect the power suppy cable I get 3v3 again. Any advice on this is greatly appreciated.
YouTube Video:
[url]https://www.youtube.com/watch?v=YETWKN9OjH4[/url]https://So I was hoping somebody her... able to offer -
Re: New Members - please post your introductions here
Having some TV problems that I'm hoping to get some advice on. BadCaps has come up quite a bit in my searching for different problems over the last 2 years so it definitely seems like I've come to the right place.Leave a comment:
No activity results to display
Leave a comment: