Re: DELL OPTIPLEX 3020 BIOS NEED plz upload

Your BIOS file can be downloaded from[URL="http://www.dell.com/support/home/us/en/19/product-support/product/optiplex-3020-desktop/drivers/advanced"] here.[/URL]Re: DELL OPTIPLEX 3020 BIOS NEED plz upload

Your BIOS file can be downloaded from[URL="http://www.dell.com/support/home/us/en/19/product-support/product/optiplex-3020-desktop/drivers/advanced"] here.[/URL]

Re: SMPS P-SMPS Board for L37WD12

Thanks Budm. That's the one I was looking for in all of the other posts about this model. Now for a few questions to clarify what I'm reading on this schematic. I know that cp613 is 22 mfd 50v. I've got that down. From that I"m reading on the notes on the schematic it says that all voltages for caps are 50v unless otherwise noted. I'm looking at cp614 and cp615. 614 says "10U" and 615 says "680p". Am I to assume they each mean mfd for each or am I off center here. Thanks again.

Re: SMPS P-SMPS Board for L37WD12

I changed values cause what I had on hand wasn't exact. The TV would not turn on unless I got it warm. Once it was warm, it would turn on and work flawlessly. I knew it was a sign of bad caps as I've been replacing caps in motherboards for years. Not sure what "sams" is.

I'm looking for the original CAP values for the P-SMPS Board for an RCA L37WD12. The board in question can be viewed [URL="https://assets.shopjimmy.com/media/catalog/product/cache/1/image/f8f28dc4a19c21aeb55ee5774693fb5d/l/a/la31682553.jpg"] here.[/URL] I've replaced them once before and know I did not use the exact same values as the originals. If someone has the schematic for this board with the values or can at least give me what they are, I'd greatly appreciate it.I'm looking for the original CAP values for the P-SMPS Board for an RCA L37WD12. The board in question can be viewed

Re: New Members - please post your introductions here

Hi everyone. Looking for help with an RCA L37WD12 SMPS P-SMPS Board.