Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
Todd S.
Member
Last Activity: 01-24-2017, 07:48 PM
Joined: 12-13-2016
Location: Brentwood/ California
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Re: Sharp LC TV Dead

    Removed tabs and:

    147862&stc=1&d=1483537665

    Ta Daaa!!

    Thankyou all contributors to this forum especially Budwich. This TV works and it didn't cost a penny....
    See more | Go to post

    Leave a comment:


  • Re: Sharp LC TV Dead

    I removed the Right side driver and found this.

    [ATTACH]147798[/ATTACH]

    The arrow indicates location.

    [ATTACH]147799[/ATTACH]


    I am assuming that this is my problem. Would love your opinions.
    Thanks a bunchRe: Sharp LC TV Dead

    I removed the Right side driver and found this.

    [ATTACH]147798[/ATTACH]

    The arrow indicates location.

    [ATTACH]147799[/ATTACH]


    I am assuming that this is my problem. Would love your...
    See more | Go to post

    Leave a comment:


  • Re: Sharp LC TV Dead

    Yes they did.

    I replaced TCON ribbons and removed the ribbon on the right side in the lower corner and the TV wouldn't turn.

    I then replaced it and removed the left side (facing from the rear) and tv turned on with back lights. The photos are the result this. I will check for more useful threads later today.

    Thanks again for the help....
    See more | Go to post

    Leave a comment:


  • Re: Sharp LC TV Dead

    After removing the two left ribbons from the TCON I now have half a screen and all back lights are looking good. I reversed the process and nothing. blank screen dead tv.

    Any advice is very much appreciated. Thank you....
    See more | Go to post

    Leave a comment:


  • Re: Sharp LC TV Dead

    I also did all the resets to no avail.
    See more | Go to post

    Leave a comment:


  • Re: Sharp LC TV Dead

    Ok went looking some more. Can't find a post with my exact symptoms that helped.
    This is what I have done:

    I have a steady standby light.
    No picture
    No sound
    When I hit the power button nothing happens and standby light remains on.
    I have 120 VAC to the power supply.
    The fuse is good.
    There are no bad caps or any other components that display damage.
    I have power coming out of the power supply but I don't know if they are proper voltage. (listed in first post).
    A small green LED lights...
    See more | Go to post

    Leave a comment:


  • Re: Sharp LC TV Dead

    Thanks for the reply Budwich,

    I did go to the Sharp 70 threads and spent hours. None were able to help. Another member said to add photos, so I did. Thought I would give a new thread a shot. My drawings have a photo of the actual plugs included.
    See more | Go to post

    Leave a comment:


  • Todd S.
    started a topic Sharp LC TV Dead

    Sharp LC TV Dead

    Hello,

    I posted a question regarding this TV several weeks ago and realized I didn't include enough info. Here is a description of the problem with photos.

    Model number is LC-70TQ15U.

    * The set has no picture, sound or anything.
    * The standby light is on steady.
    * There are no visible problems with any components.
    * When the power button is pushed, a tiny green LED lights up on the main
    board but then goes out after 3-5 minutes.

    [url]https://www.badcaps.net/forum/attachment.php?attachmentid=147493&stc=1&d=1483049055[/url]...
    See more | Go to post
    Last edited by Todd S.; 12-29-2016, 04:17 PM.

  • Re: Sharp 70" LC-70TQ15U Won't turn on.

    Does anyone know of any other web site that can help me with my issue?

    Thanks
    See more | Go to post

    Leave a comment:


  • Re: Sharp 70" LC-70TQ15U Won't turn on.

    Hope we get a response. I'm not charging for the repair. Working on this TV for a friend
    See more | Go to post

    Leave a comment:


  • Sharp 70" LC-70TQ15U Won't turn on.

    Hello,

    I'm trouble shooting this unit and could use some help. Here is what I have found so far:

    *Standby light is on.
    *Back panel removed.
    *No signs of heat or damage on any boards or components.
    *A tiny led on main board is lit when plugged in.

    Pressing power button does nothing. No clicks, nothing on screen or any sign of life.

    Any advice on what I could do from this point is greatly appreciated.

    Thanks in advance,

    Todd
    See more | Go to post

  • Re: New Members - please post your introductions here

    Hello everyone,

    Todd from California here. Born and raised in Silicon Valley with Microsoft, Hewlett Packard, Apple, Google and Microsoft at my door step.

    I have good knowledge of electronics as I worked in the industry in my younger years. I am a retired firefighter that started a home repair business. I fix anything from a gate to TV's, sound systems and other electronic devices.

    I now live in the Sacramento valley on the California Delta. As for hobbies, fishing of course.
    ...
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X