Hi, I'm writing you with regard to the denon avr 2113.
In brief - I could not find someone to write the firmware on the nand.
If you have done this before, is it possible to send you the hdmi board to fix it, or you send me an already written memory chip?
BayerD
New Member
Last Activity: 01-29-2017, 02:35 PM
Joined: 12-07-2016
Location: Poznan
-
Re: Denon avr 2802 with no sound on speaker
Officially Denon gives the upgrade, the 160Mb is for service, for clean flashes,
only ic U3002 R5F56108VNFP must be factory programmed. -
Re: Denon avr 2802 with no sound on speaker
Here you have the firmware..
[url]https://www.dropbox.com/sh/ckne01lp9pa5oog/AAAxLlziETSrIuhzH5ctIhaSa?dl=0[/url]
Flash H27U....
[url]https://www.dropbox.com/sh/1sx6i6ohcar9yp6/AAC1RbrMeqDGNPtzL4ibFqiAa?dl=0[/url]
Flash EN29LV160
[url]https://www.dropbox.com/s/op2qqctkgi03g17/AVR211329LV160.bin?dl=0[/url]Re: Denon avr 2802 with no sound on ...=0[/url]<br />Last edited by BayerD; 12-20-2016, 03:40 PM.Leave a comment:
-
Re: Denon avr 2802 with no sound on speaker
First upgrading firmware Page 52 service manual.
How not to help, replace ic ADV8003.
Firmware has a capacity of 160MBLast edited by BayerD; 12-07-2016, 02:16 PM.Leave a comment:
-
Re: Denon avr 2802 with no sound on speaker
IC damaged and he locks the audio track.
Sometimes simply upload software.Leave a comment:
-
Re: Denon avr 2802 with no sound on speaker
welcome all forum users.
madan1 AVR 2113 is difficult to repair, i repaired 8 pieces.
I have a programmer Denon and batch flash, described in the service manual.
Frequent failure in 2113 sound is ic ADV8003Leave a comment:
No activity results to display
Leave a comment: