So i took a look at the Mainboard/Motherboard as well, and found the 6 Caps gone there as well. Just for everyone's reference, the VP2030B mainboard is identical to the VP2130B mainboard. So all instructions are valid for both.
Not sure i understand your comment. I was more referring to the comparison of the Panasonic FR vs the CapXOn (which is the one on the Inverter board), would the Panasonic FR be comparable or better than the CapXon that i am replacing. CapXon features were listed by endevite earlier on..
Wanted to ask your expert opinions.. I have a VP2030B which has had all the lovely symptoms that everyone has described, and taking a look at the inverter board sure enough shows 3 blown Caps. (Still to look at the other boards)
Now unfortunately living on the bottom(top?) of the world (Australia), some of those component parts mentioned are not available here. So i wanted to start and at least replace the 3 dead CapXOn's.. The closest i could find were some Panasonics Part # EEUFR1V181 from Farnell:
Leave a comment: