Re: Panasonic Plasma 6 blink problem

Thank You TW2005 for the info. Do not find any shorted IGBT's. Need to figure out why the MID voltage is low.

Hello members, This is my first post and hopefully in the right forum. I have a Panasonic model TC-P54S2 Plasma with a 6 blink code. Have not been able to find the correct schematic on line. Have traced the fault to board TNPA5081 (SC) and find the MID voltage is at 55 volts and looks like it should be in the range of 67 to 139 volts. If I ground the TP SOS06 the set stays on with no blinks and screen stays dark. Could use some expert help as I am not sure where to go from here.
Thanks in advance

Re: New Members - please post your introductions here

Hi all,

I am located in Eastern Washington state and have been working with electronics since building my first crystal radio at age 10.

I worked in a radio/TV repair shop during my high schools days and still remember how to troubleshoot vacuum tube sets but, these new plasma sets look like they came from Mars. Anyhow, i am working on a friends Panasonic that started with a 10 blink code and now have it down to 6 blinks and I think the TNPA5081 no suffix SC board. Looking forward to learning a lot...