Re: Monitor I-INC 28 inch turns off

Thanks jetadm123,
Can I buy them on this website?
I have read on another post that not any capacitors are good, because they need to be high quality.

Thanks,
Steven

Re: Monitor I-INC 28 inch turns off

Anybody can help me to troubleshoot this? Is this the inverter on the picture? I didn't see any obvious damage on electronics.
Thanks.

Re: Monitor I-INC 28 inch turns off

Hi R_J,
I disassembled it again, and I hope this is the inverter. It is covered around with plastic and is glued on it, it's hard to take it out, but it's transparent and I took some pictures from very close with the capacitors. There are only 4 bigger capacitors on it.
Are these images helpful? Can you see anything wrong?
The board was covered with some sticky aluminium foil and another black sticky material that feels like textile. Not sure how to tape it back. I have some electrical tape (black), but I thought that can...

Re: Monitor I-INC 28 inch turns off

Thanks R_J.
Sorry, the model number is I-INC iF281D.
I have already searched the forum and found a couple posts, and read this post all the way, which described very similar symptoms:
[url]https://www.badcaps.net/forum/showthread.php?t=18375[/url]
but the original poster, AloofOne didn't say if his problem was fixed, and from page 3 the discussion was diverted
Other posts mention about turning off the monitor after 2 seconds, but mine stays on for about half minute, and later after 3 restarts it stays on continuously....

Hi everyone,
I have a 28 inch I-Inc monitor that turns off after about 20-30 seconds when I power up and is plugged in to the computer. The LED light at the bottom right corner stays blue.
When it turns off, I turn off the power from the power button at the back of the monitor, and turn it on, and the screen is back again, but it goes black after 30 seconds again. Nowadays I have to repeat this about 3 times, and eventually it stays on, but it's still very annoying to do that every time, and maybe it will turn off forever at some point.
When it started I only had to turn off...

Re: New Members - please post your introductions here

Hi everyone. My name is Steven from Toronto, Canada. I work as an IT Systems Administrator. I have lots of experience with computers. I started learning about computers with a Sinclair ZX Spectrum and Basic language. I have a Bachelors degree in Computer Hardware Engineering. Nowadays I do all kinds of stuff from websites, databases, BI reporting, troubleshooting servers and networking devices, etc.

I have a problem with a 28 monitor at home, which turns off a few seconds after I turn it on, and it does that around...