Re: Dim Clock LCD on Jenn-Air wall oven

Actually the 4th pic shows a broken transformer lead. I got it fixed. I took pics of ever inch of the board and magnified them and only 3 broken copper traces and 1 broken transformer lead were found. The C3 cap that was replaced has some give from the leads going into the cap itself. Whenever I give it a rock back and forth I can feel a slight movement in the cap. The solder connection is firm. Do you think this could cause the dim display?

Re: Dim Clock LCD on Jenn-Air wall oven

Hi Bluto, thanks for your reply. The lcd went blank over time and has been for a few years. I did change all caps and repaired the breaks in the copper traces and one break in a transformer lead. I took for repairs at local tv repair shop and computer repair shop. Pics attached, hope clear enough. After repairs there was nothing on the display for days but suddenly dim clock numbers appeared but not to be exclaimed about as others have. A brighter display would be great tho. Any ideas. THANKS...

Re: Dim Clock LCD on Jenn-Air wall oven

This forum has a wealth of info so I spent some more time reading thru lots posts and found out that a copper trace on the board may have a break. Surely enough there were 2. So another try to the repair shop fixed that problem. Reinstalled the the board and again NO DISPLAY. So to recap, I replaces all 4 caps with new ones of same values and fixed breaks in copper trace and still NO DISPLAY. Any advice, please.

Re: Dim Clock LCD on Jenn-Air wall oven

Hi Guys I am new to this forum. I need some help. I have a Jenn Air JES8850BCB slide in range with a blank LCD. After the suggestions of replacing caps on circuit board, I removed the circuit board and took to my local tv repair shop and have all 4 caps replaced. Reinstalled the board but to no avail. The LCD is still blank. Any suggestions would be greatly appreciated.