Re: Philips 42PFK6589/12 blurred colors and picture upside down.
Thank you everyone for help.
TV working again.
What I did?
From factory mode changed panel id to the correct one and changed panel flip to off. There were some other incorrect entries what I changed.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Philips 42PFK6589/12 blurred colors and picture upside down.
Original, and the OK button does not save changes....Last edited by Trtu; 10-14-2017, 02:49 PM.
Leave a comment:
-
Re: Philips 42PFK6589/12 blurred colors and picture upside down.
Yes, you are right. Six 3-digit codes are messed up (picture 1).
I changed thme to the correct ones (picture 2), but I can not save the changes.
From the service manual:
[I]How to Store SAM Settings
To store the settings changed in SAM mode (except the
RGB Align settings), leave the top level SAM menu by using
the POWER button on the remote control transmitter or the
television set. The mentioned exceptions must be stored
...
Leave a comment:
-
Philips 42PFK6589/12 blurred colors and picture upside down.
Hi all,
Got a three year old Philips 42PFK6589/12.
The previous owner said that one day TV went black, after couple months he turned TV on and got this blurred/inverted picture.
I think blurred colors is caused by bad tcon.
Picture is half black/half white If I remove left LVSD from tcon.
Picture is half blurred/half white if I remove right LVSD from tcon.
What causes upside down picture?
TV has latest firmware.
For some reason the factory reset from the menu does not work....
-
Re: New Members - please post your introductions here
Hi,
My name is Allan, 42 and I´m hobby technician.
Leave a comment:
No activity results to display
Show More
Leave a comment: