So it took a surge from a lightning storm and now just blinks a white led 5 or 6 times and then clicks off when I try to power it on. Power supply is a ba21t0f0201 2 ...

[url]http://assets.shopjimmy.com/media/catalog/product/cache/1/image/f8f28dc4a19c21aeb55ee5774693fb5d/s/h/shopjimmy-a27uampw-001-top_2.jpg[/url]

Fuse is good and no bulging caps. Nothing looks scorched. Quick continuity testing produced no shorts or anything obvious. The pins to the main board aren't labeled but there are labeled diag rails that you can put your leads on (3 p-on 12v - j747, j746,...

Re: Sceptre X322BV-HD*WXC100 no picture and no sound

chiram .... just wondering what method you used to lift the u16? heat gun? or iron with solder to loosen both sides?

Re: sanyo/funai fw32d06f dead

This link has a fairly good pic ...

[url]http://www.tvpartscentral.com/funai-ba4afsg0201-1-main-board-power-supply-for-fw32d06f/[/url]

... given how cheap these are I might just order the board but I'd still like to take a crack at repairing the current one regardless.Re: sanyo/funai fw32d06f dead<br /> ...ght just order

I've got a sanyo/funai model fw32d06f. Board is a ba4afsg0201. Basically dead. No power. No standby. I was told it took a "power hit". I have continuity at the fuse and all the caps look good. No bulging. Although I haven't gone through each one with my cap tester yet. I'm getting 120v up to the diodes on the hot side. Just looking for some advice on where to go next? Pictures on the way.

Re: New Members - please post your introductions here

Just jumping in so I can start a new thread. Tried piggy backing off a similar thread but they weren't having any off it

Re: Funai LF320FX4F Power Supply Issue?

will do .... thanks!

Re: Funai LF320FX4F Power Supply Issue?

I've got a sanyo/funai model fw32d06f. Board is a ba4afsg0201. Basically dead. No power. No standby. I was told it took a "power hit". I have continuity at the fuse and all the caps look good. No bulging. Although I haven't gone through each one with my cap tester yet. I'm getting 120v up to the diodes on the hot side. Just looking for some advice on where to go next?