Re: Repair Center Recommendations
Its about time, money, patient, and a mediocre skill set. ...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Repair Center Recommendations
For board level repairs (plasma PSU specifically) where would you recommend sending your boards?
-
Samsung PN64E7000 Won't Power On
Actually a PN64E7000FFXZA TW02.
I have an intermittent issue. I will loose the standby light and the TV will not turn on. Occasionally it will turn on and I've been able to watch for well over 5 hours.
When I loose the standby light I get two scenarios.
1) low voltage only on the PSU (5V, 3V, 15V); no high voltage (VA, VS)
2) no voltage at all, and none on the StdBy or PS-ON pins.
I found the link below and what it is telling me is the PSU is suspect. I pulled the board and there are no obvious issues with caps or solder joints....
-
Re: New Members - please post your introductions here
Newbie here, 1st post!
Plasma TV on the fritz and hoping to get guidance from the knowledgeable members here.
I'll be getting back after I check a couple more things o the set.
Leave a comment:
No activity results to display
Show More
Leave a comment: