Thanks a lot man, it worked like a charm!

I've used NeoProgrammer 2.2.0.10 + CH341A Black to flash+verfy XMC QH64AXIQ using modified/unlocked dump you've attached above. Soldered back chip to the board, then [URL="https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/90503-bios-password-dell-latitude-5510?p=3220609#post3220609"][U]disabled Absolute and exit from the manufacturing mode same as post #128[/U][/URL].

Months ago gave WSON8 adapter to my friend, almost...

Could anyone chime in to help me removing administrative password from BIOS of this ^^^^ laptop? Or am I doing something wrong.... Help

Here is some additional info/data related to my post 133 here.

Here is the dump from XMC QH64AXIQ, auto-detected as XM25QH64A via NeoProgrammer 2.2.0.10:


Updated info, Copy -> Paste from post 133 and some more:

Dell Latitude 5510, Intel Core 10th Gen
Reg Model: P80F
Reg Type: P80F002
System Number: 3C3F373-8FC8

Motherboard:
FDW50 LA-J381P
Rev:1.00(A00)

edit
Just to be on the safe side, did a dump of XMC QH64AXIQ using Colibri 1.0.1.61, Colibri "recognized" chip as GD256Q64 8Mx8,...

I will, probably tomorrow, thank you!...

Can anyone remove administrative password from this BIOS dump.

Here is more info:

Dell Latitude 5510, Intel Core 10th Gen
Reg Model: P80F
Reg Type: P80F002
System Number: 3C3F373-8FC8

BIOS chip:
XMC QH128AHIG
BIOS dump done via CH341A using NeoProgrammer 2.1.0.19, IC manually set as: W25Q128xV

Thank you in advance!

edit
Just reading earlier posts here.... Or do I need to make a dump from the other chip next to XMC QH128AHIG? Atm I'm away from that laptop

edit #2
Sometimes I feel...

Re: Samsung 930b LCD cold start problem (inverter?)

Quick necro for this old thread just to say thank you, especially to [U][B][URL="https://www.badcaps.net/forum/member.php?u=10445"]PlainBill[/URL][/B][/U]

I've used this helpful guide and suggestions to repair powerboard on friend's Samsung 930BF. Changed total of three bulged capacitors:

3pcs. 820uF/25V -> 3pcs. 1000uF/25V

...and also changed dead fuse at position F301.

Thanks once again and cheers from Serbia!Re: Samsung 930b LCD cold start problem (inverter?)