Re: Toshiba 32DT2U1 with unique problem

[url]http://www.ebay.com/itm/Toshiba-Samsung-Inverter-Board-SSI320-4UA01-/282122899697?_trksid=p2141725.m3641.l6368[/url]
SSI320_4UA01 is the part number
All the boards I have found through replacement sites have the same yellow/black combination? And they all look like crap soldering lol. If we could see the boards before we buy stuff many of us would walk away without another thought.Re: Toshiba 32DT2U1 with unique prob...41.l6368[/url]

Re: Toshiba 32DT2U1 with unique problem

Well I found a board for 15 I am going to give it a go when I get the extra money. Thank you everyone for the help!

Re: Toshiba 32DT2U1 with unique problem



The voltages are all right to the board. The fuse has voltage on both sides. I can not check the IC though.

I am gonna guess there is no way to check the back lights without a new inverter to test?

We got the TV from Walmart 4 years ago. I have been to scared to work on flat panels until now I am stuck watching a 27in crt and I figured why not see what I can do....

Re: Toshiba 32DT2U1 with unique problem

No leaking fluid from bottom top is flat and no bulging that I see. There is lettering on the back but I can not see all of it. 105c temp rating I think. I even went and checked all the diodes I could....

Re: Toshiba 32DT2U1 with unique problem



Yea just seen the edits. They are the very same. The caps do store current but I do not have a tester for them unfortunately....

Re: Toshiba 32DT2U1 with unique problem


The first 4 read 24.4 volts and BL on is 4.8v. I wont risk my Multimeter on the other, as it only goes up to 600 max for 10 seconds. There is no flicker when the tv is turned on at all. Yea the boards are very detailed on what is where and voltages!...

Re: Toshiba 32DT2U1 with unique problem

Here are some pictures of the boards sorry they are not very good. It is my day off and trying to get good pictures with a 18 month old on your arm is a bit hard. How do I measure the voltage from the inverter board to the lamps? This board slides into 8 white clips on the display back. and what voltage will it be?

As far as the on screen menu nothing shows up even when I press menu. I tried to see if the LCD is working with the bright light method but I do not think my light is bright enough to work. The Back lights do not come...

I have a Toshiba 32DT2U1 television that will turn on and everything works but the screen. The sound plays from whatever input selected just no picture. I have searched this forum and found 3 other posts but none of the issues are like mine. I have tried the disconnect power and hold power trick. I also reset the TV using the reset menu. Since everything else is working I am presuming it is not a power board/capacitor issue? I checked the voltages they are all spot on according to the other 3 posts. Does anyone think this could somehow be an eeprom issue or do you think I just have a dead display?...

Re: New Members - please post your introductions here

Hello everyone! I am very surprised this forum actually exists. I have been repairing components for a long time and had to google a few times and just now found your site.
I hope to be able to get some input on a few problems I have come across and maybe help others that may need some help as well!