HELLO EVERYONE
MONSTER ABRA A7 V13.1 HAS PROBLEM WITH NVIDIA GPU I DO REMOVE THE CHIP AND NVVDD COIL IT IS WORKING WITH INTEL GPU BUT SHUTTING DOWN AFTER ONE MINUTE CAN WE DISABLE DIS GPU FROM BIOS?
THE MOTHERBOARD CODE 6-71-NK5K0-D02A NH50HKMB-0C
mhd bero
Member
Last Activity: Yesterday, 10:24 AM
Joined: 10-06-2016
Location: istanbul
-
CAN ANYONE HELP ME AGAIN?... -
Unfortunately, it didn't work, knowing that there is a dynamic ampere draw without disable with the device’s BIOS file. As for the BIOS that you shared with me, the ampere draw is not dynamic....Leave a comment:
-
can you help me please disable onboard ram
GS55C NM-C952 REV 1.0
SN UNKNOWN...Leave a comment:
-
Thank you very much working fine...Leave a comment:
-
N :IFP047057352
MODEL:Y13G010S4EI
motherboard EM IG116_366B_ENE_V2.0
remove password please
Thank you...Leave a comment:
-
Thanks, working fine....Leave a comment:
-
THANKS ITS WORK...Leave a comment:
-
[B]I have successfully Clean the ME Region I attached THE BIOS FILE for anyone who may need it.
THANK YOU ALL[/B]...Leave a comment:
-
I downloaded the BIOS file from the Internet, the device is working, but there is a delay in booting so I think its need clean ME firmware I try it but I didn't succeed
than you allLeave a comment:
-
THE FILE WHAT I HAD ATTACHMENT IS NOT ORIGINAL FILE OF LAPTOP, THE SN FOR THE LAPTOP WHAT I HAVE WORKING ON IS GW072081674420863...Leave a comment:
-
ILIFE BIOS CLEAR ME
HI EVERYONE CAN YOU HELP ME TO MAKE CLEAR ME FOR THIS BIOS PLS.
iLife ZED AIR CX7
Anakart : XU133S Rev 2.0 Bios
i7-6660u... -
Re: ACER A515-52 schematic needed
Thank you.Leave a comment:
-
Y700 by511 nm-a541 rev1.0
Hi everyone can anyone help me to CLAER ME this bios file...Leave a comment:
-
Re: HP 840 G1 is not in committed state
thank you very much it worked 100%
you are the one...Leave a comment:
-
Re: HP 840 G1 is not in committed state
THE MACHING COME TO ME WITH NO FACTORY BIOS SOME ONE HAVE WROTE BIOS AND THE PROBLEM IS 15 SECOND TO SECRRN COME AND /Machine is not in committed state/
ASKED SOME ONE TO ME CLEAR AND SEND THE FILE TO ME NOW IT IS FAST START BUT //Machine is not in committed state// NOT FIXED
NOW I ATTACHED THE FILE HOW COME ON MACHINE
THAN YOU BRO....Leave a comment:
-
Re: HP 840 G1 is not in committed state
MY PROBLEM IS machine is not committed stateLeave a comment:
-
Re: HP 840 G1 is not in committed state
it not working for my machine can u help me
my bios here
thanks...Leave a comment:
No activity results to display
Leave a comment: