Re: Samsung 710N (and others ....)

I to have a Samsung 710N with the same problem as Pedro. Did the 47 ohm resistor trick and it turned into the "optimal resolution" problem with an occasional turning on of the display. So I went and removed the 47 ohm resistor and accidentally bridged pins 5 & 6 with solder in doing so. So I went ahead and tried it with the pins bridged. Guess what? The monitor is up and working. It might be worth a try if you are having this problem. No guarantee this will work in all cases.
Original voltage at pin 6 was 3.2 volts and after...