Re: No display asus x540up rev 2.0
Check all the voltage surrounding the LVDS connector
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: how to bypass BQ24737
I have actually managed to make a board working without the charger IC.
Leave a comment:
-
Re: Cant turn on hp 15 da0r62mb6e1 rev e board
Yes you have to check if the enable signal is coming to CPU Regulator ( VRON). Then check the impedance of the VCCore by probing its coil supply. If it is above 3 ohm.Replace the CPU regulator...
Leave a comment:
-
Re: Lenovo g50-30 self power up and dark screen
All the things that you just described points to the faulty graphic card (And yes, it includes the integrated one). The last asserted signal before POST which enables the LCD is LCDVDDEN. That's why It's a good idea to check it and act accordingly....
Leave a comment:
-
Re: dell inspiron 15 3542
After going down, Is the voltage on power button (PWRSW or NBSWON) pulled up to 3.3v as it should be?...
Leave a comment:
-
Re: Cant turn on hp 15 da0r62mb6e1 rev e board
Start first by reflashing the BIOS. It's high likely to be the bios with the symptoms that you highlighted. Make sure to remove first the BIOS battery.
Leave a comment:
-
Re: Dell 3421 motherboard 5J8Y4 does not turn on
3.3v Vdd is S0 power rail. It is present only after you press the power button ( It figures among the last volatge that comes in alongside the processor volatge). I recommend replacing the IO but you can nevertheless inject t 3.3v there and see what happen( Does this injected voltage goes down? something hot?)....Last edited by Luaina; 08-13-2019, 01:03 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: