Re: Upgrading Silverstone SX600-G PSU Caps

It is D8 indeed. D12.5 will be definitely too big, whereas D10 will be tight, touching a heatsink.

Meanwhile, I found replacements for the out-of-stock ones from Panasonic FR series.

Re: Upgrading Silverstone SX600-G PSU Caps

Do you have anything comparable to the "F" column? It's out of stock in Mouser as well.

Re: Upgrading Silverstone SX600-G PSU Caps

Since I need to order from Mouser anyway, I also checked caps from there. Luckily OP-s choice is still relevant.

Here is what I came up with
[url]https://docs.google.com/spreadsheets/d/1nLKEzwKxPivfLpCmT2WSVxQjUYoOSgZbL15BVsG_vfg/edit?usp=sharing[/url]

I also went with KZM for 220uF, however I figured that for 470uF a better fit in terms of the diameter would be KZN instead of KYB. One probably can fit a 10mm cap there but it will be tight. Rest is the same. Should be good, right?Re: Upgrading Silverstone...

Re: Upgrading Silverstone SX600-G PSU Caps

Figured out what the unknown cap was. Rubycon 35V 100uF ZLH 3M1505 105C PET underneath a piece of heatshrink.

Re: Upgrading Silverstone SX600-G PSU Caps

Bringing up an old topic, but might be useful as a followup.

The unit I have, had a noisy fan and later from reviews I found that this has a questionable choice of capacitors, I was curious to find a replacement for those.

Heres the details so far I have for my unit.



The difference with OP is that NCC was changed to Rubycon and Taicon to Teapo. Looking for replacements for Teapos now, assuming the Rubycons are OK. Any thoughts on Suncon [URL="http://media.bestofmicro.com/ext/aHR0cDovL21lZGlhLmJlc3RvZm1pY3JvLmNvbS85L1gvNDc1OTg5L29yaWdpbmFsL2luX21vZHVsYXJfUENCX2Zyb250X2NhcHNfc21hbGwuanBn/r_600x450.jpg"](pic)[/URL]?...