Re: Bulging GSC 1500uf Caps

thanks yy, exactly what i needed to know.

Re: Bulging GSC 1500uf Caps

Does anyone know anything about the GSC T20C's? Whethere they are Low ESR for example, I wouldn't want to replace Low ESR caps with ones that weren't...

Hi,

I have a Jetway 650DF that won't post, and on closer inspection some of the caps look in pretty horrible shape.

There is leakage on most of the GSC 1500uf 6.3V (part numbers T20C and some T20D). They are approx 10x15mm.

I was wondering what type of capacitor would be best to replace them?

I found these on ebay and was wondering if they would do the trick:

1) Panasonic FF 1500uf 6.3V
2) Rubycon YXG 1500uf 6.3V
3) Samxon GC 1500uf 6.3V

Also it'll be my first time replacing caps so if there's...

Hi there,

I'm new too this board and have never replaced a capacitor before. Basically, two capacitors on my Asus P4S800-mx seem to have blown not because of a design flaw but i think because of a power-supply failure (caused by impact). The tops of the two capacitors in question have caved in and there is a brown residue around the top.

The capacitors are marked with 'KZG' so I assume they are the Chemicon KZG's I have seen referred to in this site. They are rated with 820uf and 6.3v. From what I understand, I need to replace these capacitors with a similar or higher...