Re: Samsung plasma help (PN60F5300AF)

Ok, so I checked the voltages on the back of the TV with a multimeter and found the Ve and Vsc voltages to be lower than their ratings. These are both located on the Y sustain board. I also checked the voltages coming into the Y sus board through the cable, and they all seemed normal. So, I concluded that the Y sustain board was bad.
After some research, I decided to replace the Y sustain, Y buffers, and X sustain. (I had read that the Y buffers should be replaced with the Y sustain, and that the X sustain should also be replaced due...

I have a 60 inch Samsung Plasma TV (PN60F5300AFXZA). It is about three years old. I went to turn it on one day and it wouldn't turn on. There was no video and no sound, but the standby light was on. I unplugged everything and let it sit overnight unplugged. I tried the next day to turn it on (with just the power cord plugged into the wall), and it still didn't turn on.

This is all new to me, so I did some research. Afterwards, I then took the back panel off of it and checked the capacitors. I couldn't find any that were bulging, obviously damaged or leaking. I tried individually...

Re: New Members - please post your introductions here

Hi, I'm dravatio. I'm looking for some help with my samsung plasma TV.