Re: LG 60 Plasma 60PA6550 white'ish screen & shut down
Well,...Finally got to replace the Y-SUS board and,.....it fixed the issue. Now I will be selling back the main and Z-SUS board on ebay.
mjaklrsav
Member
Last Activity: 10-16-2016, 09:02 AM
Joined: 08-19-2016
Location: Oxford
-
Re: LG 60 Plasma 60PA6550 white'ish screen & shut down
Well, its not the Z-SUS board either. Next Y-SUS board. I'll see if I can get it cheaper on ebay.Leave a comment:
-
Re: LG 60 Plasma 60PA6550 white'ish screen & shut down
Going to try a new Z-SUS board then Y-SUS. Ordered Z board today. Will post results.Leave a comment:
-
Re: LG 60 Plasma 60PA6550 white'ish screen & shut down
I have a question regarding two boards. 1. Main Logic Control Board and 2. Main Board
1. Main logic Ctrl board has green LED which blinks 4 times. 2 short blinks + 1 long blink + one short. What is this diagnostic code?
2. Main Board includes one solid "ON" Red LED. Is this normal?...Leave a comment:
-
LG 60 Plasma 60PA6550 white'ish screen & shut down
My LG 60PA6550 UF model will power up and then show a white'ish screen and then shut down after 1-4 seconds.
Once in a while it will stay on and I can make out the backgroud of the screen. See pics.
I replaced the main logic control board but issue still there.
Some mentioned the C802 cap which shows indentation in center. No sure if this is normal. see pics.
All other caps appear fine and not bulging.
I was thinking on replacing the C802 cap and then replacing the Main board.
But before I do this, I was hoping... -
Re: LG 60PA5500 Turns On Then Off
Is the C802 a 0.022uF 1.25KVDC like on the 50PA5500?
The value is not veiw-able due to the glue attachment. Before I separate the components, I was hoping someone knows the value.Leave a comment:
-
Re: LG 60PA5500 Turns On Then Off
I also have LG 60PA5500 that shuts down, but prior to shutting down, the screen is snowy white. My TV shuts down in 1-4 seconds, and sometimes it just stays on with the static white screen where I can barely make out the screen.
I replaced the Main Logic board but it still has the same symptoms.
The C802 cap show thinner ban in the middle with expansion at ends.
I have gone on other forums and could not find any root causes.
Thanks...Leave a comment:
No activity results to display
Leave a comment: