Re: Hitachi LE49S508
I'm going to check them and keep the good ones in a box somewhere for future use. I wanted to use this tv for learning a bit more and I think I learned a fair bit reading and following this thread. there is no bezel on the tv, the plastics are broken, so I think I will salvage the good light strings and the boards and trash the rest.
Thanks for helping, I just needed that one "I think it may be the led" to push me to go that far.
Again thank you for the help, look forward to seeing you around the forums.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Hitachi LE49S508
So I tested the one that looked dead and it was, the rest in that string worked fine..
Leave a comment:
-
Re: Hitachi LE49S508
Was pretty easy to spot the dead one as soon as I opened it up. If one led is dead it renders the rest useless, correct?
Leave a comment:
-
Re: Hitachi LE49S508
I was thinking the same thing, I got the tv for free and I have some free time so I might just break it down and test the leds to kill some time.
Leave a comment:
-
Re: Hitachi LE49S508
I have not, I will do it right now.. I have followed every other step in this thread and everything measured up to what budm said it should have been.
If I remove the connector I get 125.6vdc at led1+ but 0 on the rest. If I read it as I turn the tv on it jumps from 0 to 199vdc and after about 1 second it falls back to 125vdc again.
Leave a comment:
-
Re: Hitachi LE49S508
So for some odd reason todays voltages changed only for the LED's.
CN4
LED 1+ - 124vDC
LED 2+ - 95VDC
LED 3+ - 66VDC
LED 4+ - 40VDC
LED 5+ - 14VDC
Could have been my DMM acting up.
Leave a comment:
-
Re: Hitachi LE49S508
I have this same tv, It has the red standby light when you plug it in but if you power on the light goes black but nothing happens.. I was testing voltages all over following the conversation in this thread but holy smokes its crazy..
Anyways my voltages are as follows:
CON801
PS-O/F - 3.15VDC
PB adj - 3.22VDC
PB O/F - 3.12VDC
GND
GND
GND
GND
+12v - 12.29VDC
+12v - 12.29VDC
+12v - 12.29VDC
CON901
GND
KEY 0 - 3.28VDC
KEY 1 - 3.28VDC
LED G - 0.03VDC...Last edited by mrwomp; 08-12-2016, 11:18 PM.
Leave a comment:
-
Re: New Members - please post your introductions here
Hi, I'm steve AKA MrWomp.. I have lurked here for a long time and used the combined knowledge to repair numerous televisions. I come from Flint, MI , I'm a 34 year old mason who plays with electronics in his spare time. Outside of work and gaming I'm a pretty boring person to be perfectly honest.
Leave a comment:
No activity results to display
Show More
Leave a comment: