Re: Samsung t260hd no power led

I was able to find some of these files that I suppose are for the service manual. I tried to follow the troubleshooting guide for the "No Power" section and as far as I can tell, I got 15V at pin 2, 5V at pin 6, and nothing at pin 7 at CN100, so I guess the problem is at the IP or power board. I probably will go ahead and buy the board on eBay since I am not that good at all with soldering/desoldering, especially if they are the tinier components (bad eyesight and shaking hands), although I may still try to troubleshoot the power board further...

Re: Samsung t260hd no power led

Were you able to eventually fix this? I have the same problem with my T260HD as it will not power on and the only light I see is at the toslink in the back. New batteries in the remote control will not do anything and I get no response whatsoever pressing anywhere at or near the bottom right corner where the "power button" is supposed to be. I have already opened it up and I couldn't find any suspicious-looking caps on either board and both ceramic fuses seemed to be in working order - I missed the F301 fuse though and will check it again....

Re: New Members - please post your introductions here

Hello! I have a Samsung T260HD that had the info panel problems before, which I fixed by disconnecting the Function assembly. Now it won't power on and the lights don't turn on either, except for the toslink port in the back. The caps don't look bad but I can't test them anyway. Fuses seem ok but I don't know if it's a problem with the power board or main board or with the ccfl's. I don't have much electronics repair experience/knowledge but I am willing to learn and listen to advice. I can get the power board on eBay (IP-58155A)...