Re: Panasonic TC-P60GT30
So I replaced the SS board and after replacing it I got the 6 code blink thought that was interesting since it wasn't doing that before. I then went and replaced the SC board it then stopped giving the 6 code blink and went back to the black screen with flickering lines. So what's next an A board?
vivisectt
New Member
Last Activity: 08-08-2016, 10:30 AM
Joined: 07-27-2016
Location: Loomis, ca
-
Re: Panasonic TC-P60GT30
Thanks I'll definitely do this when the new boards come in....Leave a comment:
-
Re: Panasonic TC-P60GT30
I reflowed the solder and cleaned up the chassis contacts and still having the same issues. Is it possible that the panel has gone bad or is it definitely one of the boards?...Leave a comment:
-
Re: Panasonic TC-P60GT30
[ATTACH]138230[/ATTACH]
Saw this on the ss board, sign or arcing ? The screws were definitely loose. Also noticed some kind of liquid near the blue caps, possibly a faulty cap?Re: Panasonic TC-P60GT30
[ATTACH]138230[/ATTACH]
Saw this on the ss board, sign or arcing ? The screws were definitely loose. Also noticed some kind of liquid near the blue caps, possibly a faulty cap?...Leave a comment:
-
Re: Panasonic TC-P60GT30
Thanks for the response, it does sound likely that it could be a grounding issue because I did have a service person come out while the tv was under warranty and he replaced a couple boards, A few months after he did the repair I was getting a shadowy flickering, possibly not tightening them down completely, tho if I'd tap on the back of the cover the problem would go away.. . I ordered an ss, SC and sub power boards just in case since they were reasonable on eBay.
Thanks again!Leave a comment:
-
Panasonic TC-P60GT30
Tv just went black with flickering horizontal lines while watching it the other day. I unplugged it for a few hours, the picture came back for 10 seconds then was back to no sound or picture. The standby led works normally with no error code. Here's a video of the screen when turning it on: [url]https://youtu.be/OqB1eHosGF4[/url]
I've taken off the back and don't see any signs of damage to the caps or anything. A push in the right direction would be greatly appreciated.
Thanks,
Sethhttps://Tv just went black with flic...g it the other -
Re: New Members - please post your introductions here
Hi everyone,
My dad has always been into fixing and tinkering with electronics so I guess I get the need to work on this stuff from him!
Really been into video games my whole life so I've
Been repairing all my old consoles from game gears to Sega cds. Now I'm onto fixing my old plasma TV :-D
SethLeave a comment:
No activity results to display
Leave a comment: