Re: Sharp Aquos 37" RED blinking power light

Yes RJ, Correct

Display Output One is the Digital signal (DVI style plug) The other seems to hold all the data signal or comms (output 2) and Display Output3 must be the analog video signals (Composite, Component & SVideo)

Re: Sharp Aquos 37" RED blinking power light

Tried the DVI- output to a computer monitor to try and 'trick' it into life.
no dice
There must be something in the output #2 cable that senses the display status?

Does anyone know if a steady blinking RED power light is an error code or is it in sleep mode?

Re: Sharp Aquos 37" RED blinking power light

Hi Dick_Barton

i have re-tried connecting the digital set top box to the AVC unit. to no avail.
I do remember (which i forgot to mention in the OP) is that I think i have made an adjustment to one of the sleep settings in the TV menu -Mode 2 i think- I wonder if this is the cause.
I have also connected the set top box through the DVI-D input (HDMI Adaptor)

The Panel will not function without the AVC media box (TU-37GAX) and by that i mean allowing to call up menu's etc.

Oh, i get...

Hi Gurus,
I hope you can help
I have a SHARP 37"Aquos LC-37G2x with a TU-37G2X AVC.
It was dad's and was in storage (cool n dry) for a while after he passed away.
I decided to rescue it from the dark and set it up downstairs.
All good worked fine last week with a Digital set top box connected via Component input.

Yesterday, I went to hook up a Raspberry Pi to it and prior to connection the RED power light was blinking steadily on the panel. When i used the remote to power on, the power light goes from RED to GREEN - relays in the panel click...

Re: New Members - please post your introductions here

Hello all,
I hope you are all travelling well. Hopefully the Gurus in here will be able to solve my tech issue