Re: Iiyama 2607WS suddenly dead
On the main cap I got 315 volts. The 2 fuses show continuity and no resistance....
davethewave
New Member
Last Activity: 10-28-2017, 08:52 AM
Joined: 07-12-2016
Location: cowes
-
Re: Iiyama 2607WS suddenly dead
Problem is the same as the op plus the guy above. Just stopped working completely, no power light nothing. I have two of these monitors so have tried different lease etc. As in both cases above it was fixed by swapping out the MBR20100CT but since I removed it I get the same readings between pins 1 and 2 and 2 and 3 so I guess in my case this is not the problem. Pic uploaded...Leave a comment:
-
Re: Iiyama 2607WS suddenly dead
I think I have the same problem. I have removed the MBR20100CT from the board. On a digital multi meter I test 0.245 volts on each terminal and nothing when reversed. This sounds like it is ok to me but the only experience I have is this thread and some youtube videos about diodes? Could someone please advise if this is ok or not thanks.Leave a comment:
No activity results to display
Leave a comment: