Re: Samsung UN50EH500FXC

Update I ordered the T-Conn board with 28859A at the start of the # on the sticker from SJ and they sent me a different board which didn't work as well. I need to have confirmation from someone as to the correct T-Conn board for this TV since I don't have the original failed board to compare to. Any help would be appreciated.

Re: Samsung UN50EH500FXC

Hi Dick
The model # is UN50EH5000FXC PJ05 Panel # CY-DF500BGMV1H
Hope this helps and so sorry for the confusion.
Bruce

Re: Samsung UN50EH500FXC

Thank you everyone for your help. I have been able to find out that there are two T-Conn boards that are recommended for this panel. M$35-D094303-L$VR333507XP02 this the one that I have and the other starts with 28859A so I am going to take a chance and order it. If nothing else I will have a lot of spare parts for sale.

Re: Samsung UN50EH500FXC

Well here is an update.
After some additional research and some help from some people much smarter than myself I think I might have solved the problem. As I had mentioned the T Conn board was replaced by the previous owner. When you do a search for P/N BN96-28859A you get a T-Conn board that this P/N is nowhere to be found. After some emails I was directed to closely look at the #'s on the sticker on the back of the board and there you will find 28859A in the start of the string of#'s. My question would be "are these boards compatable being as...

Hello
I am at a loss. I bought the TV knowing the following:
There is sound but no picture but I have back lights
The previous owner has changed the T Con board however didn't keep the old board.
I have changed the main board with no change.
I have changed the power supply board with no change.
I am sure that the key to this problem is that there is no video and that is why I changed the main board.
Would anyone suspect the T Con board or possibly one of the cables.

Your input and thought would be greatly appreciated.

Bruce

Re: 50 inch Panasonic Plasma TH-50PZ85H

Thanks So much for all your input on this. It is refreshing to see that there are members out there willing to provide suggestions. I was hoping that it might be a a bad interface board that the ribbon connector is fastened to. For the time being I will enjoy the TV complete with the black line while I look into where I could list the power supply board and main board.
Thanks again for every ones input.

Bruce

Hi There
New to the forum but hopefully someone can help me. I have TH-50PZ85U that is 8 years old. Bought it with the black vertical line problem. Was told that it happened about three months ago. As it seems everyone has suggested that I find the ribbon connector that is directly in line with the black line and I did. I removed the ribbon cable and cleaned the connector and ribbon cable with alcohol and a Q tip and reinstalled the cable and no change. I removed the ribbon cable once again and powered up the TV. This confirmed that I had the right ribbon connector and the top half of the...

Re: 50 inch Panasonic plasma vertical Black line

Did I put this post in the correct location, if not please tell me where I should put it.

Re: 50 inch Panasonic plasma vertical Black line

Hi There
New to the forum but hopefully someone can help me. I have TH-50PZ85U that is 8 years old. Bought it with the black vertical line problem. Was told that it happened about three months ago. As it seems everyone has suggested that I find the ribbon connector that is directly in line with the black line and I did. I removed the ribbon cable and cleaned the connector and ribbon cable with alcohol and a Q tip and reinstalled the cable and not change. I removed the ribbon cable once again and powered up the TV. This confirmed...