Re: Question: Samsung PN64E550D1FXZC
Just in case someone else bought the BN44-00515A Power Supply repair kit from Shopjimmy's and recieved [COLOR="Red"]K13A60[/COLOR] Mosfets in place of the K18A60's It was an error on their part.
Shopjimmy has sent me the proper parts with an apology for the time it took to respond (july 4th holiday)
Everyone makes mistakes....I found their chatline representative [B]very[/B]
[B]very[/B] good!
I'd buy from them again!!
HarryRe: Question: Samsung PN64E550D1FXZC
Just in
moon12
New Member
Last Activity: 07-09-2016, 03:25 PM
Joined: 06-30-2016
Location: Thunder Bay Ontario
-
Re: Question: Samsung PN64E550D1FXZC
OK, I changed the 10amp fuse and Mosfets at QP802-804 and replaced the 16 pin I C (802)
I now have a blinking stand by light
Now I need some help finding a schematic.
Anybody got this info?
HarryLast edited by moon12; 07-03-2016, 08:33 PM.Leave a comment:
-
Re: Question: Samsung PN64E550D1FXZC
Thanks for your input. shopjimmy has replied to my e-mail....they are working to find a suitable answer to my question (-:Leave a comment:
-
Re: Question: Samsung PN64E550D1FXZC
Yeah, I hope so, If I don't hear from them I'm going to assume they consider them adequate, and solder them in.
It would be nice to hear from someone else that has actually used these K13A60's on this board in the "QP 804" location without problems.Leave a comment:
-
Re: Question: Samsung PN64E550D1FXZC
My invoice says I bought the BN44-00515A Kit, which is a match for the # on my Power Supply board.
The packets all have location labels, and the components in the packets match the "look" of the components on the board at these locations.
I'm still waiting to hear from "shopjimmys"
I agree that it seems wrong to insert a component with a lesser value than the original that failed.
I'm not a electronics pro, that's why I'm seeking advice.
It seems that...Leave a comment:
-
Question: Samsung PN64E550D1FXZC
I have the BN44-00515A Power Supply Repair Kit from Jimmys
I have found shorted Mosfet @ QP 802 and blown main fuse.
Blown P/N is K18A60V
Replacement from shopJimmy's is K13A60D
I'm wondering if the experts here could advise me on using this 13A mosfet??
I have contacted Jimmy's no response (probably off for the long weekend)
Harry
Pic of board@ thread: SAMSUNG PS64E550 not starting - stuck in standby -
Re: New Members - please post your introductions here
Hi Everyone, I've been scouring your forum for a few days now and am amazed at the expert help that has been flowing so freely!
I'm sure the answers I'm looking for will be found in the Plasma TV repair section (-:
HJLeave a comment:
No activity results to display
Leave a comment: