Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Do anyone know a good place to purchase Lcd Screens i have two 2013 flat screen tv with crack screen one is a sanyo Model#Dp42841 Manufactured june 2013 the other is a element electronic Model# ELEFW502 Manufactured March 2013 will be gratful for any help
Round2thrift
Member
Last Activity: 03-22-2017, 03:36 PM
Joined: 06-23-2016
Location: Minneapolis Minnesota
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Got it thanks for your help Reeceyburger123 Set is working great nowLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Can i replace 4 1000uf 25V Caps with 4 2200uf 25V caps?Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Reecey
The setting sticker on the panel says Va at 63V it measure 54V you say leave at factory setting, i raise the Vs from 204V to 210V did get rid of the top half of the screen mal discharge there or only 2 adjustment pot on the power supply and thats Vs and Va. should i adjust the va?
Ve Voltage measured 92V the sticker say 94V have not located the Adjustment Pot
VSC I have not located the test spot or the adjustment pot or these on the X and Y sustains?Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Tested the voltages on this set today
Va 63 in range sticker 63
Vs 204 sticker says 207
ve 92 sticker says 94
where do i go to test the vsc and where can i find where to adjust themLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
So far i have only changed out a few board and checked a few voltages doing these adjustment sound like i need special tools have to do some more research, trying to find tom thread you mention have not learned how to completely get around in here yet.Last edited by Round2thrift; 11-03-2016, 08:14 PM.Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
When i turn the tv on with out any signal this is what the screen look like until it warms up
standing in front of the TV this is the left side this sparkling goes from top to bottom accross about a 1/4 of the screen...Last edited by Round2thrift; 11-03-2016, 08:47 AM.Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Reeceyburger123
look like the words are out of focus and when people move picture goes out of focus with a pattern around people body until it catch up to a beautiful i quess it bad motion what your take on that i think i read somewhere X-main could cause a slow motion effectLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
ReeceyBurger123
The words and letters look like they are out of focus almost like a blur and when the people move there are like pattern around there body like they go out of focus then it catches up and everything clears up i think i read somewhere the x-main could cause this. hope i explained it well enough where you can point me in the right directionLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
if thats what it takes to keep her going i will do it. seem like i got a little slow motion going on now what can cause this?Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
Got My used Control board today installed it and what do you know, No More Lines that fixed that problem. thanks Alastair E and Reeceybuger123 you guys were spot on. I still don't have a crisp picture seems a little out of focus do not have the original remote even adjusting the contract does not help any suggestion will help
ThanksLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
No i have not ham-fisted it lol but i did change out the control board can this be bad even after the successful Pattern test? if that the case i got a bad board the original was toastedLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
You are right alastair the black screen shot with the line across is without any input connect the second is with DVD playing i have reseated and cleaned the ribbon as advised by reecey on buffer, still got the line what is hand fist repair? that has not been done by me anyway and is there a way to test the control board?Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
What picture are you trying to load Reecey?Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
I found a post from tom66 on how to run the test pattern by jumpering the 3 and 4 pin on the logic board. Test worked fine still showed the horizontal line threw all colors but green
any suggestion? anyone?Leave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
yes i now have image, i have clean and reseated the buffer Ribbon , the x-main , the logic board and the ribbon to the address board you mention test pattern i have not tried or know what that isLeave a comment:
-
Re: Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
A newbie here thank for the quick response and advice i have been doing a little research
i even replace the ysus and still got the horizontal line i search the forum and cant find anything about this here will research your advise....Last edited by Round2thrift; 10-25-2016, 08:14 PM.Leave a comment:
-
Philip Plasma 50pfp5332D/37 Single Horizontal Colored Line
I have this 50 inch philips plasma TV has a great pictures when i first turn the set on i get two colored lines at top of TV. when i switch it off and back on i only get one line in the center of the set. there is also a sparkling on the y sustain side of the TV. I had to change the upper and lower buffer board. This line is very thin and seem as if it is on top of the image
Any help would be greatly appreciated... -
Re: Philips 50PFP5332D/37 TOUGH DOG as they use to say
Had this same problem with light on y sustain. i end up with a bad upper buffer...Leave a comment:
No activity results to display
Leave a comment: