Re: Panasonic TGP55VT30 with 8 blinks
tw2005, thanks for your help. I'll see if I can come up with an A board
utee
New Member
Last Activity: 06-27-2017, 01:40 PM
Joined: 06-23-2016
Location: Bartlett, TN
-
Re: Panasonic TGP55VT30 with 8 blinks
Try this again....Leave a comment:
-
Re: Panasonic TGP55VT30 with 8 blinks
The inverted Viera choices at the very bottom of the screen are not reflections (they do appear to be mirror images that are cut off). I am going to try to attach the video (it was too large a file when I tried earlier).
The video will help explain what the TV is doing. Thanks again for your time and help.Leave a comment:
-
Re: Panasonic TGP55VT30 with 8 blinks
Please take a look at the attached photos and the video. They show what I was trying to describe. Thanks for your help!...Leave a comment:
-
Re: Panasonic TGP55VT30 with 8 blinks
tw2005, I will post some images and video. By the way, there is no input source connected to the tv, if that makes any difference. On power up, the tv will display the Viera banner across the bottom of the screen. Then it displays the white rectangle that jumps around the screen, until I press a button on the remote. Thanks for your help!Leave a comment:
-
Re: Panasonic TGP55VT30 with 8 blinks
Yes, I meant TC-P55VT30. My bad. It seems the TV kicks out (goes to the SOS8) when it flashes to a full screen display (perhaps due to insufficient power), after I press a button on the remote. Before I press the button on the remote, the TV will display a white box (about 1 foot by 2 foot) which shifts around the screen like a screen saver. I would appreciate any help that might be out there!Leave a comment:
-
Panasonic TGP55VT30 with 8 blinks
This TGP55VT30 had 7 red blinks initially. After replacing the SC board, it started the 8 blinks whenever the "input" button is pushed on the remote. It momentarily displays the column of inputs and then the screen goes black and the 8 blinks begin. I have just replaced the SS1 board but it does the exact same thing. Can anyone suggest a possible solution for this problem? -
Re: New Members - please post your introductions here
Glad to find this forum!!!Leave a comment:
No activity results to display
Leave a comment: