Re: TC-P50VT20 10 Blink Code



Great, so I'm positive that A board is still alive, will now send SC board for repair (got somone in UK and buffers for double check) and cross my fingers when I will have them back. Will report here.
Thanks for your help!...

Re: TC-P50VT20 10 Blink Code



so anyone with a VT20 can confirm me the 10blinks are normal when SC2 and SC20 disconnected (no Scan Board attached)!?

just want to make sure no other board is broken.

thanks!...

Re: TC-P50VT20 10 Blink Code



Dear tw2005,

disconnected SC2 and SC20 gives me 10 blinks, (same with only sc2 disconnected)....

Re: TC-P50VT20 10 Blink Code

Dear all SC board experts,

I had a perfectly running TX-P46VT20E (european version of the TC-P46 13th generation plasma high end 3d model).
This weekend when I powerd up the panel from complete power off ( switch on the side was off) to power on, I heard a pop and saw a little flash (the room was dark) coming from the area where the SC board is sitting.
After this SOS4,
I unplugged SC2 (which is short) and SOS goes to SOS10.

Even unplugging SC20, P11 (so no SS and SC (or buffer) boards running) doesn't...