Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
no resistance is out of range of the meter
tom83
Member
Last Activity: 03-16-2017, 12:51 PM
Joined: 06-10-2016
Location: paris
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
Pin1 - 0v
pin2 - 0.2v
pin4 - 320vLeave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
What else can I check, because it still does not work?Leave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
The résistance is about 200 kOhmsLeave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
well, thank you for your helpLeave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
Yes its working, but it seemed to me that he had no power, Now I have a subwoofer speaker connected directly to the right front channel in the amplifier, and plays better than the original sub amplifier.Leave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
Yes i replaced this caps, and the DCV is around 320VDC.
It worked fine, but I decided to change all amplifiers F4558 I had the feeling that he was losing power. I ordered new NE5532 and after receipt I installed on board but the subwoofer has not turned on. There is no characteristic "click".Leave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
I dont have any DCV of green LYTICS cap,
Yes I plugged the power supply 230v and also a large transformer....Last edited by tom83; 03-06-2017, 01:04 PM.Leave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
I not assumed a new thread because the subwoofer is structurally very similar to that of the subwoofer in this thread. Subwoofer does not turn on. I read the whole topic and after measurements I think it's a transformer because its winding they have no resistance.Leave a comment:
-
Re: Subwoofer auto on/off: Taga Harmony Platinum SW-10 v.2
Hi Guys
I have a subwoofer taga tsw-90v3, which is damaged. I suspect this is the transformer in the red circle on the pictures, but he does not have any signs on the cover. How can I determine the model of this transformer?...Leave a comment:
No activity results to display
Leave a comment: