Re: LG 50PN6500 Rainbow pixels
Ok, Im not the best with these terms but the Ve test point? I can't find one cause I'm not sure what it is.... but I did take pictures of the pin outs, if these are the test points then great but I'm not sure where to test the voltage. Thanks in advance...
xboxlivemikey
Member
Last Activity: 06-13-2016, 09:24 AM
Joined: 06-09-2016
Location: illinois
-
Re: LG 50PN6500 Rainbow pixels
So I have examined the coils solder joints, they are good, now if there are shorted components, is there any I should focus on? I see no scorch marks, caps are not swollen, everything visually checks out so I don't know where to start, any advice would be great but if it's not something that I can pin point I will just buy a replacement board since it's only $24.99Leave a comment:
-
Re: LG 50PN6500 Rainbow pixels
Alright man, Thank you for your help.Leave a comment:
-
Re: LG 50PN6500 Rainbow pixels
Ive circled two components... are these the erc coils?...Leave a comment:
-
Re: LG 50PN6500 Rainbow pixels
Ok I will remove again and inspect, ive re-soldered most components on the board already but did not see anything right off the bat, thank you.Leave a comment:
-
Re: LG 50PN6500 Rainbow pixels
don't mind the cat
Leave a comment:
-
Re: LG 50PN6500 Rainbow pixels
Here is a couple pics of the screen......Leave a comment:
-
Re: LG 50PN6500 Rainbow pixels
Thank you for the quick reply, I know the pictures are going to help alot, now the xmain is also referred to as z-sus sometimes correct?Leave a comment:
-
LG 50PN6500 Rainbow pixels
Hi I have a 50" LG 50PN6500, I found next to my dumpster and took it in to find it powers on has sound but the picture is bad. Any signal on any input is showing up but in just rainbow pixels and blackness, so I opened it up pulled the y-sus and z-sus board and soldered most joints that I thought were suspect cold solder, it did not fix it. I'm currently at work but will attach pictures once i get home, there are no lines and no missing sections the entire display is doing this. I'm going to check the voltage and make sure they are at the correct levels also once i get home. Any input is... -
Re: New Members - please post your introductions here
I've also been doing board level repair for several years and ive been a bench tech for a while now.Leave a comment:
-
Re: New Members - please post your introductions here
Hi, My name is mike im a technician here for advice and help.Leave a comment:
No activity results to display
Leave a comment: