Dell G5 5500 bios need to fix
I have attached the BIOS I extracted from both chips.
it give me one beep and no display
I would appreciate if someone fixed it for me.
service tag 367RF63...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
please I need bios for hp 15-ae003ne(ABW50 LA-C501P)
hi guys i need ec+main bios for ABW50 LA-C501P Rev:1.0 anyone there..,thanks in advance
-
Need HP ENVY x360 gpc56 la-j492p schematic
HELLO
im looking for HP ENVY x360 gpc56 la-j492p schematic
Any help would be appreciated
Thanks
-
Re: HP G62 star reverer - missing +V5A rail
pin 14 EN1=0v
pin 27 EN2=5v
13&28=0vi only have enable and signals for 3.3v
Leave a comment:
-
Re: HP G62 star reverer - missing +V5A rail
thanks all
No elements are heating or shorting.
IT8502 IO vcc= 0v how can i check missing volt?
Leave a comment:
-
Re: Dell 5010 dis to uma blank screen
Thanks bro. But i already used this tutorial as it's.
Unfortunately same problem .
Leave a comment:
-
Re: Dell 5010 dis to uma blank screen
Thanks guys for reply
I applied same version you sent. Also i checked soldered
everything. I don't know what's wrong.
Leave a comment:
-
Dell 5010 dis to uma blank screen
hello friends,
after converting board to uma i have ablank screen,
backlight on and caps lock working but no data on screen.
no signals on RN5505 & RN5509
what i missed?
-
HP G62 star reverer - missing +V5A rail
hello friends,
I have hp g62 Wont turn on.
Some corrosion around PU850 (SN0608098RHBT)
+V3.3AL OK
+V5A is 0 volt.
I've replaced PQ850 and PU850, no change.
There is no short to ground on the +5VA rail.
Measurements I've taken:
PU850 pins:
Pin 26 (DRVH2 +V3.3AL_UG_20) = 3.5V
Pin 25 (LL2 +3_3V_AL_PHASE_20) = 3.3V
Pin 24 (VBST2 +3_3V_AL_VBST_20) = 8.4V
Pin 23 (DRVL2 +V3.3AL_LG_20) = 0.9V
Pin 15 (DRVH1 DHI) = 0V
Pin 16 (LL1 +V5A_PHASE_20) = 0V
Pin 17 (VBST1...
-
-
-
HP Pavilion All-in-One 24-a251d bios
[B][SIZE="4"][B]hi
ineed dump bios for da0n83mb6g0 rev:g
[/B][/SIZE][/B]
-
cdl50 la-d707p schematic pls
hi guys
ineed cdl50 la-d707p schematic pls
Leave a comment:
-
Re: no volt on processor and vga
this i/o is ene 930qf a1 not programable ihave two bios ic on board and already reprogramed it
Leave a comment:
-
Re: no volt on processor and vga
i changed vcore ic and still same problem
Leave a comment:
-
no volt on processor and vga
[B][SIZE="5"]ihave hp g6-1036ex power on for one second and power off
all voltage on board ok except processor and vga voltage
vr_on enable segnal missing on i/o
ichanged i/o and flashed bios but still not working
pls help me guys
[/SIZE][/B]
[ATTACH]181296[/ATTACH]
[ATTACH]181297[/ATTACH][B][SIZE="5"]ihave hp g6-1036ex power on for one second and power off
all voltage on board ok except processor and vga voltage
vr_on enable segnal missing on i/o
ichanged i/o and flashed bios but still not working...
-
Re: change mac address by hex editor
i will try ... thanks bro
Leave a comment:
-
-
Re: change mac address by hex editor
HP ProOne 600 G2 21.5-inch NonTouch All-in-One PC
Leave a comment:
-
change mac address by hex editor
[FONT="Arial Black"][B]hello friends
i want to change mac address by hex editor i search for 00-25-AB-A0-12-83
but icould not find mac ... can u help me ?
[ATTACH]177669[/ATTACH][/B][/FONT]...
No activity results to display
Show More
Leave a comment: