Re: Dell 2407 Ghosting and Color Problems
Yes ., changed Main Board instead TCon one, will take some picture today (need to dissasemble again).
Btw, i will try to purchase a new T-Con board i see that some ICs was overheat because same ics looks diferents in the same board, for example printing letters, in some are cleaned out
Will send a picture later!...
samsagaz
New Member
Last Activity: 09-21-2016, 05:52 AM
Joined: 05-30-2016
Location: Rosario/Santa Fe
-
Re: Dell 2407 Ghosting and Color Problems
changed 4H.L2K01.A03 board and still same problem (or worst)
is possible that will be the PSU Fault?Leave a comment:
-
Sharp LC-46E77UN Horizontal and Vertical Lines
Hey guys i have an Sharp LC-46E77UN TV that have vertical and horizontal lines.
someone figure whats wrong? -
Re: Samsung LN40B550K1 Vertical Lines
Thanks ! if do that and dont get fixed, what can be broken? Is possible an LCD Fault?...Leave a comment:
-
Samsung LN40B550K1 Vertical Lines
Hey guys i have an Samsung LN40B550K1 TV that have vertical lines.
Someone know what can be happend? Is possible that changing the Tcon will fix the issue?
Or looks like its an LCD Problem? -
Re: Dell 2407 Ghosting and Color Problems
Some updates... looks like the problem of the color are when are combined, for example i tried blue, red, green backgrounds and looks OK. but when are combined looks very bad!
When dark background and white letters display very bad too.
Tried to rework the chip with the hot station and(40seconds at 400° nothing changed)
Changing the board willl fix that issues?Leave a comment:
-
Re: Dell 2407 Ghosting and Color Problems
will try to change the 4H.L2K01.A03 board from my Monitor. but not easy to find it, At least found some sellers in china that have it in hiswebsites.
btw, someone know if my LCD have 4H.L2K01.A03 can i use A04 A05 or A06 revision? Will get some improvement using higher version?Leave a comment:
-
Dell 2407 Ghosting and Color Problems
Hey, after 2 years of use my dell 24" model 2407WFP start show me ghosting problem, so i purchased a new monitor and stop using the old one. A few months ago i start using the old one and after a few uses now the colors are very very bad.
I open it and checked caps, and looks all OK.
Is possible to start fail the chip FLI5962?
I try to find a main board to purchase without luck :/
Show some pics of the error of the LCD!
something to recommend me to check? -
Re: New Members - please post your introductions here
Hey guys, as you may know im know on this forum
im from Argentina join to learn and ask about electronics stuff, a few months reading the forum, now decided to register
Leave a comment:
No activity results to display
Leave a comment: