r40pmd
Paul mac
Last Activity: 09-26-2022, 12:27 PM
Joined: 05-24-2016
Location: WEST SUSSEX
-
Auto engine management ecu
JUST A QUICK QUESTION IS THERE ANY INFORMATION ON THIS WONDERFUL FORUM AMONGST THE VERY INTELLIGENT MEMBERS ABOUT ECU REPAIRS FAULTS ETC ENGINE MANAGEMENT THAT IS,OR COULD ANYONE POINT ME TOWARDS ONE.MANY THANKS PAUL
-
panasonic plasma tx-p50xt50b and chip U203
Hi all im very confused about the chip im going to replace on 50" plasma tx-p50xt50b on PSU, its marked u203. I have the skimatic which matches my board, but when i went to ebay to buy the chip it does not seem to match the pins and what they do, i have uploaded pics so you can see my problem the pin that says N/C and the dot on the chip are in the same place but the pins and what they do are not. My board i have matches the skimatic i have, but the one on ebay allthough has my model number in picture shows pins doing wrong thing in wrong place, i can see how common this fault is by ammount... -
Re: Flir dm284 imaging multimeter would it be worth the cash outlay
thanks for that you have given me plenty to resurch ithink im sold on it but im going to look at all the links tanks agaiin
-
Flir dm284 imaging multimeter would it be worth the cash outlay
Hi all i got a email this morning from flir, show casing this super duper multi meter. i looked into some flir camaras a few years back, and with a price tag of a small deposit of a house in uk, look was all i could do. my question to all is has anyone got one of these and was it worth the cash outlay,i havent even looked at the price.yet becase i know its going to be, a shit load of money anything with this type of imaging allways is.i do know that it comes with some very good software programs for taking an image of say a 50" plasma with the back off you could take stock picture of a tv... -
surface mounted caps dont understand the values
hi all i have a panasonic plasma 50" main boared that has 5 caps on it that i dont understand the values on them . nor can i find any ref anyware to them could someone help me out with the volts and uf values please... -
Re: Pc fan on my t-con board to watch the tennis
being as it takes about five mins to go off without fan assist if i hold a board under the t-con and go at it with a hairdryer it shoould break down quicker if its that board it wont damage main board if i assist its shut down with heat will itLeave a comment:
-
Re: Pc fan on my t-con board to watch the tennis
ive tryed that put a big heat sink off a grapfics card with paste made no differance at allLeave a comment:
-
Re: Pc fan on my t-con board to watch the tennis
its a LG37lf65 ive just fitted a mainboard not long ago it works fine with out any fans for about five mins or so then the picture just dissapears all voltages at PSU are right when picture goes backlight stays on and sound still there funny thing is wont let me turn it off into stand by with button on side of tv have to unplug it then plug straight back in will do another 5min then off again unless i point a desk top fan at back of tv will stay on all day PC fan worked for about 15mins have had to go back to desktop fan blowing on...Leave a comment:
-
Pc fan on my t-con board to watch the tennis
hi all this is probably a dumb ass question but im hoping theres going to be a simple answer, yesterday afternoon while watching the tennis my LG lcd tv gave me the blank screen but sound was ok anyways after a bit of a poke around and a big desktop fan i narrowed it down to the t-con board and its fine runs great with a force 10 blowing directly at it. ive ordered a new one but wont be hear till tus/wed,so what ive done is hung a PC fan directly in front of the t-con ,it has two wires red, black.12v pos and negative ,and luckly my PSU had two pins that i needed to run it, empty. So now my question... -
Re: Jvc lt-42tg30j
ok will do that asap thanksLeave a comment:
-
Re: Jvc lt-42tg30j
my names paul, you asked me if the vestel psu were identical it would appear not quite, ive posted a pic with the new board on the bottom and old one on top. Apart from the switch plug in the old top board, not preasant on the new board at bottom. But 2 connecting wires in its place. There is one more differance in the 2 boards i can see, which is L817 in the old board appears to be empty. on old one but has TH2 in its place.. Where as new board has L817 Preasant and TH2 empty. I have studyed both boards in great detail and there are definatly no other differances,...Leave a comment:
-
should i post this in the thread i started yesterday as its all surposed to help others i just dont want to upset anyone by putting it in wrong place PICTURE in google + -
my names paul, and i left a short vid of what the jvc lt42 is doing on start up now. Should i be posting hear im unsure. In the mean time you asked me if the vestel psu were identical it would appear not quite, ive posted a pic with the new board on the bottom and old one on top. Apart from the switch plug in the old top board, not preasant on the new board at bottom. But 2 connecting wires in its place. There is one more differance in the 2 boards i can see, which is L817 in the old board appears to be empty. on old one but has TH2 in its place.. Where as new board has L817 Preasant and TH2 empty.... -
Re: New Members - please post your introductions here
hi my names paul and i just spent the last three quarters of an hour writing a bit about myself, which for me as one finger typest was an epic amount and as i was finishing a key on my keyboard was pressed by someone out of my control and it was GONE just GONE and im too insenced to try again right this minite but i will come back again thanks for your patiance paul
Leave a comment:
-
Jvc lt-42tg30j
Hi everyone the tv is a JVC LT-42TG30J.and i no its old and should be junked but the lady wants it fixed becase she likes the tv and is not one to be argued with So first i replaced all the caps and the four diodes on powering back up it blew the fuse in between the AC input and the switch. The white one and the black one, as mine has a switch on the back, anyway i gave up on the power board, and bought another, on puting it in i noticed the board that i bought had only the white ac input so i left the switch out and pluged the ac straight to the white input. When powered up the blue led flashed... -
Re: JVC LT-42TG30J no sign of life at all
Hi everyone the tv is a JVC LT-42TG30J.and i no its old and should be junked but the lady wants it fixed becase she likes the tv and is not one to be argued with So first i replaced all the caps and the four diodes on powering back up it blew the fuse in between the AC input and the switch. The white one and the black one, as mine has a switch on the back, anyway i gave up on the power board, and bought another, on puting it in i noticed the board that i bought had only the white ac input so i left the switch out and pluged the ac straight...Leave a comment:
No activity results to display
Leave a comment: