Re: 60PV250-UB issues

thanks for the replies, any basic tests I can do on the x sus board with a digital mm?

Hi all!

Trying to repair my dad's old plasma. He says it started about 3 months ago with color issues/ghosting. While watching there would be color change, etc. which grew worse over time. A couple weeks ago he says he heard a pop sound, and the tv would not turn on at all.
I did a little research and saw references to the cold solder issue with coils on y and z boards.
I removed both boards from the tv and resoldered on the z sus coils which appeared cracked. I did not remove old solder but added to what was there.
I put everything back together and plugged...

Re: New Members - please post your introductions here

RC here.
Like many others, ran across badcaps when hoping to repair a plasma. So far, not having much luck. Removed the z sus and soldered the coils (were cracked), put it back in and I see a pic but it is very dull/dim.

Will keep at it!

Thanks to those who post repair advice and expertise.

Much appreciated!

RC (dutchtowner, because that's where I live).