mindfx
New Member
Last Activity: 04-07-2025, 08:33 AM
Joined: 05-12-2016
Location: lithuania
-
ok , if mosfets have short`s , no matter between which pins it`s bad. , so put new ones. always check resistor , whick provides HV power to theese mosfets . this resistor should be around 1 ohm. then if them blown again , then replace power control IC , and of cource mosfets and HV power supply resistor again. Also ensure , that there is no short on output before.
-
Re: Asus zenbook ux305 bios needed
Hi still need this dump , please someone upload
Leave a comment:
-
Re: Samsung LE22C451E2W Changing channels alone
On key1 and key 2 , there is pull-up resistors , key 1,2 must have constatnt 3,2v to work , so mine problem was one of pull-up resistors , key 2 had only 0,4v , so it didnt works, put 1kohm to 3,3v , solved my problem of channel changing itselfLeave a comment:
No activity results to display
Leave a comment: