Re: Old Samsung LCD
Sorry for the blurry pics. Yes this is an inverter\power combo. The resistance on cp815 was around 10, once I removed the fuse it was around 120. Thanks for your help!
n01d3x
New Member
Last Activity: 05-22-2016, 01:31 AM
Joined: 05-11-2016
Location: Auburn
-
Re: Old Samsung LCD
One last bump before I give up
Leave a comment:
-
Re: Old Samsung LCD
Bump for help. I guess i could just ohm out all of the mosfets and caps, replace any bad ones as well as the rectifier?Leave a comment:
-
Re: Old Samsung LCD
Best pics I could get, if you need better I can get a better camera later and take better ones. It's the same board as the one in the link I posted. You gave the guy in that post a list a points to test on his rectifier, I did the same and got in the 50 range with the 200 setting on everything except point 2 & 3 I got nothing....Leave a comment:
-
Re: Old Samsung LCD
I'm at work, but I'll take some pics when I get home, thanks!Leave a comment:
-
Re: Old Samsung LCD
I tried to edit the topic to include the model info, but for some reason it doesn't show up in the title. Here is the info, Samsung LCD LN40B640R3F Power Board BN44-0026ALeave a comment:
-
Old Samsung LCD
I am trying to repair an old samsung lcd, board
BN44-00264A. I followed the steps I found here[URL="https://www.badcaps.net/forum/showthread.php?t=26568&page=2"]https://www.badcaps.net/forum/showthread.php?t=26568&page=2[/URL]
Continuity on all points of the rectifier are ok except for 2&3. All caps look ok visually, I assume its either the rectifier or a mosfet, thoughts. Oh, originally it turned off and wouldn't turn back on, no stand by or nothing. The main fuse was blown and blew a new fuse immediately.I am trying to repair an old samsung lcd, boardLast edited by n01d3x; 05-11-2016, 07:48 PM. -
Re: New Members - please post your introductions here
Hello all!Leave a comment:
No activity results to display
Leave a comment: